VEVOR Gravel Grid - 5200x2700 mm - 75-450

The VEVOR Gravel Grid is a high-performance ground reinforcement system designed for superior load...

Best current price£39.90from Vevor UK

One Offer

1 offer from £39.90

View price history by clicking the chart icon.

Vevor UKVEVOR Gravel Grid, 3 Inch Depth, 17.06 x 8.86 FT / 5200 x 2700 mm, 1880 LBS Per Sq ft Grass Ground Retainer, Permeable Geo Grids Driveway Stabilization, for Garden, Patio, Walkway, RV Parking Slopes
Free delivery in 1–3 days
£39.90
Visit shop

Product Information

Full details

The VEVOR Gravel Grid (75-450) is designed for contractors, landscapers, and homeowners looking to stabilize driveways, paths, and slopes with a reliable ground reinforcement system. Its key benefit is the impressive 1,885 lbs per square foot load-bearing capacity, which prevents shifting and erosion in soft ground; however, users should note that significant manual labor is required to properly anchor the grid and distribute the infill material evenly across its 5200x2700 mm surface.

All features

Model Part Number75-450
BrandVEVOR

Extended Product Information

FAQs

Can I drive over this grid immediately after installation?

Yes, provided the grid is properly anchored and the cells are fully filled and compacted with your chosen material.

What type of infill works best?

Crushed stone, angular gravel, or sand are recommended for driveways, while soil and grass seeds are excellent for sloped erosion control.

Is the material UV resistant?

Yes, the high-density polyethylene is engineered to withstand various weather conditions, including direct sunlight exposure.

Can I cut the grid to fit around a tree or curve?

Absolutely, the material is designed to be cut with heavy-duty shears or a utility knife to accommodate obstacles.

Do I need a landscape fabric underneath?

While not strictly required by the grid itself, using a geotextile fabric beneath the grid is highly recommended to prevent weeds from growing through the infill.

Troubleshooting

Grid edges lifting after installation

Ensure additional stakes or ground anchors are placed at more frequent intervals along the perimeter.

Infill settling unevenly

Use a vibrating plate compactor during the fill process to ensure the infill is packed tightly into the honeycomb cells.

Pros and Cons

Pros

  • Exceptionally high load-bearing capacity
  • Resistant to environmental degradation and corrosion
  • Promotes effective site drainage
  • Flexible and customizable for various site layouts

Cons

  • Requires substantial physical effort for installation
  • Requires proper ground preparation for optimal results
  • Does not include stakes for anchoring if specific ground types require them

Setup, Compatibility & Care

Installation follows a standard three-step process:

  1. Preparation: Clear the project area of debris and level the sub-base to ensure a flat foundation.
  2. Deployment: Roll out the grid and secure it using landscape staples or appropriate stakes along the edges to prevent movement while filling.
  3. Infill: Distribute your chosen material—gravel, sand, or soil—into the honeycomb cells, raking it until the grid is fully covered and compact.

Care is minimal due to the high-density polyethylene construction; the material will not rust or rot. Periodically check that infill levels remain topped up if high-traffic areas cause slight compaction over several seasons.

Price History

DatePrice
Visit shop