Setup, Compatibility & Care
Compatibility
This lever is compatible with the following models:
- Yamaha YZ 80/85 (1994-2014)
- Yamaha YZ 125/250 (1994-1999)
- Suzuki RM 125/250 (1988-2015)
Setup
- Use a standard wrench set to loosen the cable adjuster and disconnect the old lever.
- Remove the pivot bolt using a socket wrench, ensuring you do not lose the pivot bushing.
- Apply a small amount of waterproof grease to the pivot bolt before sliding the new Raceline lever into place.
- Reattach the cable and adjust the free-play to your preference, typically leaving 10-20mm of play at the tip of the lever.
Care
Regularly clean the pivot point to prevent dirt accumulation, which can cause sticking. Periodically re-grease the pivot bolt to maintain smooth operation.