Black and Decker Jigsaw - KS501

Unplug the jigsaw. Use the blade clamp mechanism to release the old blade and insert the new blade, ensuring it is securely fastened.

Use blades that are compatible with the KS501 model, typically T-shank blades.

Loosen the bevel adjustment lever, set the base to the desired angle (0 or 45 degrees are common), and tighten the lever to secure the base.

Keep the jigsaw clean by wiping it down after each use. Check the blade regularly and replace when needed. Store the tool in a dry place.

Always wear safety glasses when operating the jigsaw. Ensure the workpiece is securely clamped. Disconnect the jigsaw from the power supply when changing blades or not in use.

The dust blower helps to keep the cutting line clear of sawdust, ensuring better visibility and more accurate cuts.

Press the trigger to start the jigsaw, then press the lock-on button to keep the jigsaw running without holding the trigger. To turn off, press the trigger again.

Check the power connection and ensure the outlet is working. Verify the power switch is in the 'on' position.

Ensure the correct blade type is used for the material. Check the blade's condition and replace if necessary. Make sure the base plate is flush against the material.

Check that the blade is properly installed and tightened. Reduce the cutting speed if possible.