Aluminium Soffit Flat Profile Length - 175mm x 2mm x 3mtr

These products arrive with a high-quality, durable finish. While they can be repainted if desired, it is recommended to use an appropriate metal primer and exterior-grade paint specifically formulated for powder-coated surfaces.

You should use a hacksaw for small adjustments or a circular saw equipped with a blade designed for cutting non-ferrous metals to ensure a clean, burr-free edge.

Lengths are typically joined using the manufacturer-provided jointing pieces or by butt-joining them over a common rafter to ensure support.

This specific product is a flat profile. If your building design requires roof void ventilation, ensure that you are using the correct vented components or fascia-mounted vents in conjunction with these boards.

Aluminium is naturally resistant to corrosion. With the protective powder coating applied to these boards, they are highly resistant to rust, even in coastal environments.

Store the boards indoors or under cover, flat and off the ground, to prevent the aluminium from bending or the finish from being scratched.

Check if the fascia track is obstructed by debris or if the track was bent during transport. If clear, ensure the board is held perfectly square to the track during insertion.

Ensure the ends of the aluminium profiles are cut perfectly square using a chop saw or metal cutting guide to ensure a tight butt joint.

Verify that the board is fully seated in the wall-mounted receiving channel and that it has been mechanically fixed to the rafters at appropriate centers.