Kenable Flat Cable Lead - RJ11 Male Plug to RJ45 Male Plug - 1m Black

This cable is primarily used to connect ADSL modems or routers to ADSL filtered faceplates, or to send phone line signals through dedicated LAN cabling.

No, this cable is not an Ethernet cable. It uses an RJ11 to RJ45 configuration specifically for ADSL broadband and telephone line passthrough, not standard computer networking.

No, this cable is not designed for connecting standard telephone handsets. It features an RJ11 to RJ45 straight-through wiring for ADSL equipment.

It means the wires in the cable are connected in the same order from one end to the other. This is crucial for ADSL signals and distinguishing it from crossover cables used in networking.

An ADSL filtered faceplate is a type of telephone socket that filters out the high-frequency signals used by broadband internet, preventing interference with voice calls.

The cable is 1 meter in length.

The connectors themselves are typically clear plastic, but the cable is black.

Verify both RJ11 and RJ45 connectors are securely plugged in. Ensure the RJ11 end is connected to a filtered ADSL faceplate. Test with a different known working cable if possible. Check that your ISP service is active.

Check for damage to the cable, especially near the connectors. Ensure the cable is not routed near sources of electrical interference. Confirm that the faceplate is correctly filtered for ADSL.

Double-check that you are using the correct ports. The RJ11 is a smaller, typically 4-pin connector, while RJ45 is larger with 8 pins. This cable is *not* for standard phone handset lines or computer Ethernet networking.