d-c-fix Paladina Self Adhesive Vinyl Film - Grey

Add a touch of sophistication to your space with this d-c-fix Paladina Self Adhesive Vinyl Film. T...

Best current price£6.99from The Range

All Offers

3 offers from £6.99 - £12.72

View price history by clicking the chart icon.

The RangeD-C-Fix Paladina Self Adhesive Vinyl Film - Grey
£4.99 delivery
£6.99
Visit shop
B&QB&Q - Paladina Greige Marble Sticky Back Plastic Furniture Worktop Self Adhesive Wrap 2M X 45Cm
Free delivery in 1–3 days
£9.99
Visit shop
eBayDCFIX GREY MARBLE STONE SELF ADHESIVE STICKY BACK PLASTIC VINYL FILM 2mx67.5cm
Free delivery in 1–3 days
£12.72
Visit shop

Product Information

Full details

This d-c-fix Paladina Self Adhesive Vinyl Film in Grey is designed for DIY enthusiasts and homeowners looking for a quick and stylish way to update furniture, countertops, and other flat surfaces. Its key benefit is providing a sophisticated marble aesthetic with a hassle-free peel-and-stick application. A minor caveat is that it requires a smooth surface for optimal adhesion and best results.

All features

Model Part Number437471
Brandd-c-fix

Extended Product Information

FAQs

What are the dimensions of the vinyl film roll?

Each roll measures 2 meters in length and 45 centimeters in width.

Can I apply this film over existing wallpaper?

It is best applied to smooth, solid surfaces. Applying over textured or peeling wallpaper may result in poor adhesion and an uneven finish.

Is the film waterproof?

The vinyl film itself is water-resistant, making it suitable for kitchen countertops. However, ensure seams are well-sealed to prevent moisture from seeping underneath.

Can I reposition the film after applying it?

Yes, the film can be repositioned during the application process if you lift it carefully. Once firmly pressed down, removal may leave residue or damage the underlying surface.

How do I clean the surface after applying the film?

Clean with a soft, damp cloth. Avoid abrasive cleaners or scrubbers that could scratch or damage the film's surface.

What is the material of the film?

The film is made from high-quality, durable self-adhesive vinyl, often referred to as sticky-back plastic.

Is this film suitable for outdoor use?

This product is designed for indoor use on furniture and surfaces. Prolonged outdoor exposure may degrade the material and adhesive.

Troubleshooting

Air bubbles under the film

Gently lift the edge of the film where the bubble is located and reapply, smoothing it down with a squeegee or credit card. For small bubbles, carefully prick with a fine needle and smooth out.

Film not sticking properly

Ensure the surface is thoroughly cleaned, dried, and free of dust or grease. Reheat the adhesive side slightly with a hairdryer on a low setting, then reapply pressure.

Difficulty cutting the film cleanly

Use a sharp craft knife or utility blade and a metal ruler for straight, clean cuts. Cutting on a self-healing mat can also help.

Wrinkles or creases during application

Lift the affected section of the film and reapply, taking care to maintain tension and smooth out any creases as you go. Gentle heat from a hairdryer can make the vinyl more pliable.

Pros and Cons

Pros

  • Easy to apply and reposition
  • Provides a high-end marble look without the cost
  • Durable and resistant to daily wear
  • Versatile for various DIY projects
  • No messy glue required

Cons

  • Requires a smooth, clean surface for best adhesion
  • May be challenging to apply perfectly on curved surfaces
  • Can be difficult to remove cleanly if left on for extended periods
  • Potential for small bubbles if not applied carefully
  • Limited color and pattern options within this specific product line

Setup, Compatibility & Care

Setup:

  1. Ensure the surface is smooth, clean, dry, and free of dust or grease.
  2. Measure and cut the film to the desired size, leaving a slight overlap if necessary.
  3. Peel back a small section of the backing paper from one edge.
  4. Carefully align the film with the edge of the surface and begin to apply, slowly peeling off the backing paper as you go.
  5. Use a smooth tool (like a squeegee or credit card) to press the film down, working from the center outwards to remove air bubbles.
  6. If bubbles appear, gently lift the film and reapply, or use a pin to prick the bubble and smooth it down.

Compatibility:

This film is designed for use on any smooth, clean, and non-porous surface. This includes finished wood, laminate, metal, glass, and painted walls (ensure paint is well-adhered). It is not recommended for textured, uneven, or unfinished surfaces, as adhesion will be compromised.

Care:

Clean the applied film with a soft, damp cloth. Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the surface finish. Wipe up spills promptly.

Similar items

Price History

DatePrice
Visit shop