Sanding Belt - 150mm x 1220mm - 100 Grit

This sanding belt is 100 grit, which is suitable for medium-duty stock removal and surface preparation.

The dimensions are 150mm in width and 1220mm in length.

The abrasive material is premium aluminium oxide, known for its durability and performance.

No, it is designed for belt sanders that use the 150mm x 1220mm belt size and is compatible with ThatCable models and other leading brands.

Avoid excessive pressure, keep the belt clean and dry, and use the appropriate grit for your task. Replace worn or damaged belts promptly.

While 100 grit is effective for preparation, it is generally considered a medium grit. For fine finishing, you would typically move to higher grit belts (e.g., 180 grit and above).

A super-flexible design allows the belt to better conform to the curves and contours of the workpiece, ensuring more consistent contact and a smoother, more uniform finish.

Adjust the tracking knob on your belt sander. Refer to your sander's manual for specific instructions. Ensure the belt is the correct size and not damaged.

Check the belt tension; it may be too loose. Ensure the belt is properly seated on the pulleys and that the pulleys themselves are clean and free of debris.

Ensure you are using the correct grit for the material and task. Avoid excessive pressure. Keep the belt clean and ensure the sander's ventilation is not blocked, which can cause overheating.

Check for proper tension and alignment. Debris lodged between the belt and the pulleys, or worn pulleys, can also cause noise. Inspect the belt for damage.