This handy dent repair kit enables you to remove minor dents from your car, van or motorcycles bod...This handy dent repair kit enables you to remove minor dents from your car, van or motorcycles bodywork. It works on flat panels such as a door or roof, as well as curved panels like the wing or valance. The kit comprises a glue gun, release agent, dowel, scraper, glue gun stand, glue sticks, pull tab, cross bar, and wing nut. It requires a 230V mains power supply for the glue gun. Suitable for all vehicles. To remove the dent, assemble the crossbar with the wing nut. Apply glue from the gun on top of the dent, place the crossbar over the glued area, and fasten the wing nut. Once the glue dries, unfasten the wing nut to level the dent. Use the release agent and scraper to remove the wing nut and peel off the glue. Instructions are provided.
Streetwize Black Dent Repair Kit, Sports Direct£4.99 delivery£16.99Visit shop →
Product Information
Full details
This guide is for anyone looking to repair minor dents on their vehicle's bodywork using the Streetwize Dent Repair Kit (SWDR). The kit provides a comprehensive solution for removing dents from both flat and curved panels, offering a cost-effective alternative to professional repairs. However, it's important to note that this kit is designed for minor dents only, and may not be suitable for extensive damage.
All features
Model Part Number
SWDR
Brand
Streetwize
Extended Product Information
FAQs
What kind of dents can this kit fix?
The kit is designed for minor dents and dings on vehicle bodywork. It's most effective on smaller, less severe damage.
What vehicles is this kit compatible with?
This kit is suitable for all vehicles, including cars, vans, and motorcycles.
Is the glue gun included?
Yes, the kit includes a glue gun and glue sticks.
What if the dent is too big or deep?
This kit is designed for minor dents. For more significant damage, professional repair is recommended.
How do I remove the glue after pulling the dent?
Use the release agent and the scraper provided in the kit to remove the glue residue.
Do I need any other tools?
The kit includes all the necessary tools for dent removal.
How long does it take to repair a dent?
The time varies depending on the size and location of the dent, but each attempt can take a few minutes.
What voltage does the glue gun need?
The glue gun requires a 230V mains power supply.
Troubleshooting
Glue gun not heating up.
Check the power supply and ensure the glue gun is properly plugged into a 230V outlet. Check the fuse.
Pull tab not sticking to the dent.
Ensure the surface is clean and dry before applying glue. Allow the glue to fully dry before attempting to pull the dent.
Difficulty removing the pull tab after use.
Apply the release agent liberally. Use the scraper provided in the kit to gently remove the glue and the pull tab.
Dent not fully removed.
Repeat the process. Consider using a different pull tab or adjusting the angle of the pull. If the dent is too deep, professional help may be needed.
Pros and Cons
Pros
Cost-effective alternative to professional dent repair.
Easy to use with included instructions.
Suitable for a variety of vehicle types.
Comprehensive kit with all necessary tools.
Repairs both flat and curved panels.
Cons
Only effective for minor dents.
Requires a 230V mains power supply.
May require practice to achieve optimal results.
The process can be time-consuming depending on the dent.
Effectiveness depends on the dent size and location.
Setup, Compatibility & Care
Setup: Ensure you have a 230V mains power supply for the glue gun. The kit comes with all necessary tools. Follow the provided instructions for each step.
Compatibility: This kit is suitable for use on cars, vans, and motorcycles. It works on both flat and curved panels.
Care: Store the kit in a clean, dry place. Clean the tools after use to maintain their effectiveness. Handle the glue gun with care, and always unplug it when not in use. Ensure to use the release agent to remove glue residue and prevent damage to the vehicle's paintwork.