Cuprinol Exterior Wood Preserver - Acorn Brown 5L

Coverage is up to 6 m²/L, but this can vary depending on the wood's condition and how many coats are applied.

Drying time is between 2-6 hours, depending on the surface and weather conditions.

Apply 2-3 uniform coats for the best protection.

This product is not specifically designed for decking. While it can be used on exterior wood, ensure the surface is suitable and well-prepared.

Rinse off any spills on plants immediately with water.

Remove excess product with a cloth, then clean with water.

The volatile organic compounds (VOC) content is 67 g/l.

The final shade may vary slightly. Apply a test coat in an inconspicuous area to check the color before applying to the entire project.

Ensure the application temperature is above 5°C and not damp. Check that the surface is clean and dry. Make sure you haven't applied the product too thickly.

Apply the product in thin, even coats, avoiding over-application. Wipe up any drips immediately with a cloth.

Ensure that the wood surface has been correctly prepared. Stir the product thoroughly before and during use to ensure even pigment distribution. Apply uniform coats.