WAGO Electronic Circuit Breaker - Single Channel 24VDC 2.0A

This specific model (787-2861/200-000) is rated for a maximum continuous current of 2.0A.

No, this is an electronic circuit breaker designed exclusively for 24VDC applications.

The compact design reduces the overall size required for mounting, allowing for smaller control cabinets or more components to be fitted into existing spaces. The dual voltage output terminals also reduce the amount of wiring needed.

The status signal provides a way to monitor the operational state of the breaker (e.g., tripped or active). This signal can be integrated into a central control or monitoring system to alert operators or trigger automated responses.

No, it is designed to work with economical standard 24VDC power supplies. Its design helps manage the power effectively for reliable circuit protection.

The switch-on capacity is greater than 50,000 µCF (microfarads), meaning it can handle significant inrush currents without false tripping.

Yes, the breaker can be activated or reset via a remote input signal, in addition to a local switch option.

Verify that the connected load does not exceed the 2.0A rating. Check for potential short circuits in the load wiring. Investigate if the inrush current is exceeding the breaker's switch-on capacity or if the power supply is unstable.

Ensure the overload or short circuit condition has been cleared. Verify that the supply voltage is present and within the specified range (24VDC).

Confirm that the status signal terminals are correctly wired to the monitoring system. Check the configuration of the status signal (single or group message) and ensure the correct output is being observed.

Verify the wiring to the remote input or local switch terminal. Ensure the activation signal is within the specified voltage and logic levels.