Metsä Wood - Smooth Planed Whitewood Spruce Stick Timber - 2.4M - 34mm - 34mm

PSE stands for Planed Square Edge. It means the timber has been machined on all four sides to create a smooth surface and precise, square edges, making it ready for immediate use or finishing.

As whitewood spruce is a softwood, it is not naturally resistant to outdoor elements or rot. For outdoor use, it requires proper treatment with weather-resistant paints, stains, or pressure treatment to ensure longevity and prevent decay.

It is suitable for light structural applications, such as internal framing for non-load-bearing walls or shelving. For heavy load-bearing structural work, it's crucial to consult a building professional to ensure it meets specific requirements and regulations.

Store the timber flat, off the ground, in a dry, cool, and stable environment. Avoid direct sunlight, extreme temperatures, and high humidity, which can cause warping or twisting. Allow it to acclimatize to your work environment.

Standard woodworking tools are sufficient. This includes hand saws, circular saws, miter saws for cutting, drills for pre-drilling and fastening, sanders for smoothing, and measuring tools.

Yes, absolutely. The smooth, planed surface of this timber is ideal for accepting a wide range of finishes, including paints, stains, varnishes, and lacquers. Ensure the surface is clean and dry for best results.

This often occurs due to improper storage or changes in humidity. Always store timber flat in a dry, stable environment and allow it to acclimate to your project's environment for a few days before use.

Softwood can split easily. To prevent this, pre-drill pilot holes slightly smaller than the screw's diameter, especially when fastening near edges or ends. Use appropriate fasteners for the timber's thickness.

Ensure the timber surface is clean, dry, and free of dust or debris before applying any finish. For an even smoother result, lightly sand with fine-grit sandpaper (e.g., 220-grit) between coats.

Use a sharp saw blade appropriate for wood. For cross-cutting, a blade with a higher tooth count will produce cleaner results. Support the timber firmly during cutting to minimize vibration.