MANNOL Brake Fluid DOT-3 - 500ml
Best current price£4.78from Autodoc
Best offers
Shopping.co.uk recommended and popular offers
Autodoc£4.78Visit shop MANNOL Brake Fluid MN3003-05
Visit shopAutodoc£4.78Visit shop One Offer
1 offer from £4.78
View price history by clicking the chart icon.
Product Information
Full details
This guide is for users of MANNOL Brake Fluid DOT-3 (500ml) in cars and trucks with drum brakes and front disc brakes not subject to too active operation. This fluid ensures reliable brake system operation across a wide temperature range, with a high boiling point and excellent low-temperature properties. Note that it is aggressive towards paint and varnish coatings, so care is needed during handling.
All features
| Model Part Number | MN3003-05 |
|---|---|
| Brand | MANNOL |
Extended Product Information
FAQs
What is the boiling point of MANNOL Brake Fluid DOT-3?
The boiling point is greater than 215 °C.
What vehicles is this brake fluid suitable for?
It is recommended for use in cars and trucks of early years with drum brakes (and front disc brakes), which are not subjected to too active operation.
Does this brake fluid affect paint?
Yes, it is aggressive towards paint and varnish coatings.
How often should I change my brake fluid?
Follow your vehicle manufacturer's recommendations, typically every one or two years, or as specified in your vehicle's service schedule.
What are the benefits of using this brake fluid?
It provides reliable operation of the brake system at all ambient temperatures due to the increased boiling point and excellent low-temperature properties. It offers high chemical and thermal stability, good lubricating ability, and good viscosity-temperature properties. It neutralizes the formation of steam bubbles and effectively neutralizes water condensation.
What is the operating temperature range?
It provides reliable operation of the brake system at all ambient temperatures, with excellent low-temperature properties down to -40 °C.
Is this brake fluid compatible with all brake systems?
No, it is compatible with older systems that specify DOT-3. Check your vehicle's manual.
Troubleshooting
Spongy brake pedal feel.
Bleed the brake system to remove air bubbles. Check for leaks in the brake lines.
Brakes feel weak.
Check brake pads and rotors for wear. Inspect the brake lines for leaks or damage. Ensure the correct brake fluid level is maintained.
Brake fluid is contaminated.
Flush and replace the brake fluid. Identify and fix any source of contamination.
Pros and Cons
Pros
- Reliable braking performance across a wide temperature range.
- Protects brake system components from corrosion.
- Compatible with a variety of brake system materials.
- Maintains brake system efficiency.
- Reduces the risk of brake failure.
Cons
- Aggressive towards paint and varnish coatings.
- Not suitable for modern brake systems.
- Requires adherence to manufacturer's instructions.
- Performance may be affected by excessive moisture.
- Must be stored properly to avoid contamination.
Setup, Compatibility & Care
- Compatibility: This fluid is compatible with vehicles that specify DOT-3 brake fluid. Always check your vehicle's owner's manual for the correct brake fluid specification.
- Preparation: Ensure your vehicle is parked on a level surface. Gather necessary tools, including a wrench, a container for used fluid, and appropriate safety gear (gloves, eye protection).
- Procedure: Carefully follow the brake fluid replacement procedure outlined in your vehicle's service manual. This typically involves removing old fluid from the master cylinder, filling with MANNOL DOT-3, and bleeding the brakes at each wheel cylinder to remove air.
- Care: Avoid contact with paint and varnish coatings, as the fluid can cause damage. Dispose of used brake fluid responsibly, according to local regulations. Store the brake fluid in a tightly sealed container, away from moisture and direct sunlight.