Best current price£44.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£44.99Visit shop B&Q - Germany Aerocube 12V Digital Car Air Compressor Tyre Inflator 10 Bar 150Psi H235100
Visit shop2 offers from £44.99 - £58.79
View price history by clicking the chart icon.
The Heyner Aerocube is a 12V/120W car air compressor designed for drivers needing a reliable and convenient way to inflate tires for cars, 4x4s, vans, and trucks. Its key benefit is the digital pressure gauge with automatic stop, allowing precise inflation to a preset level (up to 10 bar/150 PSI). A potential caveat is that it requires a 12V cigarette lighter socket for power.
| Model Part Number | H235100 |
|---|---|
| Brand | HEYNER |
The Heyner Aerocube can reach a maximum pressure of 10 bar or 150 PSI.
Use the buttons on the digital display to increase or decrease the pressure value before turning on the compressor. The compressor will automatically stop when this preset value is reached.
Yes, the Heyner Aerocube is suitable for cars, 4x4s, vans, and trucks, provided the tire pressure does not exceed the compressor's maximum limit and the vehicle has a 12V socket.
While primarily designed for tire valves, it is suitable for various inflatables. Check the product packaging or manual for included adapters.
The length of the power cord and air hose are designed for practical use with most standard passenger vehicles. For exact measurements, refer to the product specifications or manual.
No, the LED light is operated by a separate button and can be turned on or off as needed, making it useful for low-light conditions without draining battery power unnecessarily.
It is normal for the compressor to generate heat during use. If it becomes excessively hot, turn it off and allow it to cool down completely before resuming use.
Ensure the 12V plug is fully inserted into a working cigarette lighter socket. Check the vehicle's fuse for the accessory socket. Verify the engine or ignition is on.
Allow the compressor to inflate the tire for a few seconds to get a stable reading. Ensure the hose is securely connected to the valve without leaks. Deflate and re-inflate, checking readings at intervals.
Check if a pressure limit was accidentally set lower than the current tire pressure. Ensure the unit is not overheating; allow it to cool down if necessary.
Ensure the screw-on connector is tightened properly onto the tire valve. Check the rubber seal on the connector for damage and replace if necessary.
Setup:
Compatibility:
Care:
