Best current price£20.99from eBay
Shopping.co.uk recommended and popular offers
eBay£20.99Visit shop 110mm Soil Pipe Reducer 32mm Boss Adaptor Solvent Waste Push Fit Seal Kit Grey
Visit shop
B&Q£22.29Visit shop B&Q - 110mm Soil Pipe Reducer + 32mm Boss Adaptor Solvent Weld Waste Push Fit Seal Kit (Grey)
Visit shop4 offers from £20.99 - £22.29
View price history by clicking the chart icon.
This SPARES2GO 110mm Soil Pipe Reducer and 32mm Boss Adaptor Kit is designed for plumbers and DIY enthusiasts needing to connect smaller 32mm waste pipes to a larger 110mm soil stack system. Its key benefit is providing a secure and compliant connection, though it requires solvent welding for the 32mm pipe, which may need specific tools and techniques. The kit includes a reducer that fits inside 110mm pipes and a boss adaptor for the 32mm connection, both made from durable PVC-U in grey.
| Model Part Number | 03-NDY-898 |
|---|---|
| Brand | SPARES2GO |
The 32mm boss adaptor uses a solvent weld connection. This means you will need to use PVC primer and solvent weld cement to create a permanent, watertight seal with the 32mm pipe.
No, the kit includes the 110mm soil pipe reducer and the 32mm boss adaptor. You will need to purchase solvent weld primer and cement separately.
The 110mm reducer is designed to fit inside a standard 110mm soil pipe, providing a secure fitting point. The attached boss adaptor then allows a smaller 32mm pipe to be connected to this system.
The reducer has a fitting diameter of approximately 106mm (designed to fit inside 110mm pipes), an overall diameter of 122mm, and a height of 49mm. The pipe connection diameter without the boss adaptor is typically 55mm - 60mm.
The 32mm boss adaptor is specifically designed for solvent weld pipes. It is not intended for use with push-fit or compression fittings.
This product is manufactured to comply with BS EN 1329 B, which is a European standard for soil and drainpipe systems.
The kit is made from PVC-U (Unplasticized Polyvinyl Chloride), a durable and corrosion-resistant plastic commonly used for plumbing applications.
Ensure both the pipe end and the inside of the adaptor are clean, dry, and free of dust. Reapply primer and solvent weld cement, ensuring proper application and holding the joint for the recommended time. Check that the pipe is fully inserted.
Verify that the 110mm soil pipe is a standard size and not damaged. Ensure the reducer is the correct model for internal fitting. Check for any obstructions inside the 110mm pipe.
If the leak is from the 32mm joint, it likely requires re-doing the solvent weld. If the leak is from the 110mm connection, ensure the reducer is fully seated and that the 110mm pipe itself is not compromised. Inspect the reducer for any cracks.
Confirm that the correct components are being used and that they are undamaged. Ensure no excess solvent weld cement is obstructing the connection point. Refer to any specific diagrams provided with the product if available.
Setup:
Compatibility:
Care:
