Setup, Compatibility & Care
Setup: Ensure paving joints are clean, dry (if possible, though wet application is permissible), and free from debris. For best results, joints should be a minimum of 5mm wide and ideally 20mm deep.
Application: Open the container and use a stiff brush to sweep the Geo-Fix compound into the joints. Ensure the compound fills the joint completely. Lightly compact the material using a trowel or small tamper. Brush away any excess material from the paving surface.
Compatibility: This product is compatible with most paving types including natural stone, porcelain, terracotta, clay, concrete, and cobble stones. It is suitable for joints 5mm and wider.
Care: Once cured, the jointing is largely maintenance-free. Clean paving surfaces as usual. Avoid using harsh chemical cleaners directly on the joints. If repairs are needed, simply reapply the compound to the affected areas after cleaning.
Important Note: Not suitable for "V" shaped joints.