Setup, Compatibility & Care
Setup:
- Ensure your vehicle is parked on a level surface and the engine is cool.
- Locate the oil filter, typically accessible from underneath the vehicle.
- Use the appropriate tool to unscrew and remove the old oil filter.
- Lightly lubricate the gasket of the new Bosch oil filter with fresh oil.
- Screw the new filter on by hand until the gasket makes contact with the engine block.
- Tighten the filter an additional half to three-quarters of a turn.
- Refill the engine with the correct type and amount of oil.
- Start the engine and check for leaks.
Compatibility:
This oil filter is compatible with various Audi, Skoda, and VW models. Verify compatibility with your vehicle using the MPN (06H115403), cross-references (COMLINE EOF227, FRAM PH10600, KNECHT OC 456, MANN-FILTER W719/45), or your vehicle's owner's manual before installation.
Care:
- Replace the oil filter at the intervals recommended by your vehicle manufacturer.
- Dispose of the used filter and oil responsibly, in accordance with local environmental regulations.
- Inspect the filter during oil changes for any signs of damage or unusual wear.