Pro-Kleen Clear Lacquer Spray - Gloss - 400ml

This lacquer spray is designed for hard surfaces like wood, plastic, and metal. It is not recommended for use on fabric or soft furnishings as it can stiffen the material and may not adhere properly.

The lacquer is touch dry in 15-30 minutes. However, full curing can take 24-48 hours, during which time it's best to avoid heavy handling or exposure to moisture.

No, Pro-Kleen Clear Lacquer Spray features a non-yellowing formula specifically designed to maintain its clarity and prevent yellowing over time, even on white or light-colored surfaces.

Yes, you can use it as a sealant over existing paint. Ensure the paint is fully dry and clean before applying the lacquer. It can also be used as a base coat before painting.

Coverage varies depending on the surface porosity and application thickness. A typical 400ml can will cover approximately 1.5 to 2 square meters with two coats.

This product is not intended for use on surfaces that will come into direct contact with food. It is a protective coating for decorative and functional items.

It is essential to use this product in a well-ventilated area, preferably outdoors or in a workshop with good airflow and extraction. Wear a suitable respirator mask to avoid inhaling fumes.

Shake the can more vigorously and frequently. Ensure the nozzle is clear; if not, turn the can upside down and spray briefly to clear it. Clean the nozzle with a solvent if necessary.

You may be applying the lacquer too thickly or holding the can too close to the surface. Apply in thinner, more even coats from the recommended distance.

Ensure the surface was clean, dry, and free from contaminants (dust, grease, wax) before application. A primer may be necessary for certain difficult surfaces.

This can happen if the can was not shaken sufficiently, leading to an uneven distribution of gloss agents. Ensure thorough shaking before and during application.