Solvent Soil Pipe Reducer - 110mm to 50mm/40mm/32mm - Black

Name: Solvent Soil Pipe Reducer - 110mm to 50mm/40mm/32mm - Black
Brand: Pipestation
SKU: zbygcgws4c
Availability: InStock

This 110mm to 50mm / 40mm / 32mm reducer set is used to connect either a 50mm, 40mm or 32mm waste ...

Best current price£17.37from OnBuy.com

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

OnBuy.com£17.37Visit shop

Solvent Soil Pipe Reducer 110Mm To 50Mm 40Mm 32Mm | Pushfit Solvent Weld Waste Pipe Fitting Reducer Plug Connector Soilpipe Drain Pipe Fittings | Push 5060788751827

Visit shop

All Offers

2 offers from £17.37 - £20.60

View price history by clicking the chart icon.

OnBuy.comSolvent Soil Pipe Reducer 110Mm To 50Mm 40Mm 32Mm | Pushfit Solvent Weld Waste Pipe Fitting Reducer Plug Connector Soilpipe Drain Pipe Fittings | Push 5060788751827

Free delivery in 1–3 days

£17.37

Visit shop

eBayPipestation Solvent Soil Pipe Reducer Set 110mm to 50mm / 40mm / 32mm | Pushf...

Free delivery in 1–3 days

£20.60

Visit shop

Product Information

Full details

This Pipestation Solvent Soil Pipe Reducer is for plumbers and DIY enthusiasts needing to connect smaller waste pipes (50mm, 40mm, or 32mm) to a larger 110mm soil pipe system. Its key benefit is providing a secure, adaptable connection using solvent weld, with a slight caveat that the smaller pipe connections are solvent weld only. This black reducer set facilitates drainage adaptation, featuring multiple insert options and an offset hole for installation flexibility.

All features

Model Part Number	110mmReducerBlack
Brand	Pipestation

Extended Product Information

FAQs

Can I use this reducer with pushfit pipes for the 50mm, 40mm, or 32mm connections?

No, the 50mm, 40mm, and 32mm outlets are specifically designed for solvent weld pipe connections only. Pushfit is only applicable for the 110mm end if connecting to a pushfit 110mm pipe.

What adhesive should I use with this reducer?

You must use a solvent weld primer and solvent weld cement specifically designed for plastic drainage pipes. Always follow the adhesive manufacturer's instructions.

How many reducer inserts are included?

The set includes three reducer inserts: one for 50mm pipe, one for 40mm pipe, and one for 32mm pipe.

Can I connect a 60mm pipe to this reducer?

No, this reducer is designed only for 50mm, 40mm, or 32mm solvent weld pipes. You would need a different adapter for a 60mm pipe.

Is this reducer suitable for underground drainage?

While designed for drainage, ensure it is used in accordance with local building regulations and specific requirements for underground installations, particularly regarding the solvent weld joint integrity.

What is the purpose of the offset hole?

The offset hole provides greater flexibility during installation, allowing for slight adjustments in pipe alignment to avoid obstacles or achieve a cleaner run.

Troubleshooting

Reducer does not fit the 110mm socket.

Ensure you are using a standard 110mm fitting. Check for any debris or damage on the pipe or fitting that might be obstructing the connection.

Waste pipe connection leaks.

Confirm that solvent weld primer and cement were used correctly on both the pipe and the insert. Ensure sufficient curing time was allowed before testing the system. Re-apply solvent weld if necessary.

Difficulty fitting the offset insert.

Ensure the 110mm socket is clear. The offset is designed for flexibility; try rotating the insert slightly to find the optimal position for your pipe run.

Incorrect size insert is being used.

Double-check the diameter of your waste pipe and select the corresponding insert size (50mm, 40mm, or 32mm).

Pros and Cons

Pros

Offers multiple reduction sizes (50mm, 40mm, 32mm) in one pack.
Provides a secure connection via solvent weld for the smaller pipes.
Offset hole aids in installation flexibility.
Designed for standard 110mm soil pipe systems.
Includes all necessary inserts for common waste pipe sizes.

Cons

Smaller pipe connections (50mm, 40mm, 32mm) require solvent weld, not pushfit.
Primarily designed for solvent weld systems on the smaller outlets.
Color is black, which may not suit all aesthetic requirements if visible.

Setup, Compatibility & Care

Setup:

Ensure the 110mm soil pipe fitting is clean and dry.
Select the appropriate reducer insert (50mm, 40mm, or 32mm) for your waste pipe.
Apply solvent weld primer and then solvent weld cement to both the inside of the 110mm socket of the reducer fitting and the outside of the 110mm soil pipe spigot (if pushfit) or inside the fitting socket (if solvent weld).
Insert the 110mm pipe into the reducer fitting, twisting slightly to ensure even distribution of the cement.
For the smaller outlets, apply solvent weld primer and cement to the outside of the waste pipe and the inside of the chosen reducer insert hole.
Firmly push the waste pipe into the selected reducer insert hole, holding for the recommended time to allow the solvent weld to set.

Compatibility:

Designed for use with standard 110mm pushfit or solvent weld soil pipe fittings.
The 50mm, 40mm, and 32mm outlets are for solvent weld pipes only.
Ensure the waste pipe diameter precisely matches the chosen insert (50mm, 40mm, or 32mm).

Care:

This product is designed for permanent drainage connections and requires no regular maintenance. Ensure connections are watertight upon installation. Protect from excessive physical impact.