Best current price£5.69from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£5.69Visit shop Loops 1.5M Dc Power Cable Lead 5.5Mm X 2.1Mm Male Plug To Bare Ends Cctv Camera Dvr
Visit shop
B&Q£7.29Visit shop - 1.5M Dc Power Cable Lead 5.5mm X 2.1mm Male Plug To Bare Ends Cctv Camera Dvr
Visit shop3 offers from £5.69 - £7.29
View price history by clicking the chart icon.
This 1.5-meter DC power cable from Loops is designed for users needing to connect low-current DC power sources to devices with a 5.5mm x 2.1mm power input. Its primary benefit is the flexible bare-end termination, allowing for custom connections or repairs. A key consideration is its specific connector size, which is not compatible with many common IP cameras that use a 3.5mm socket. Key features include a durable PVC jacket, strain relief, and pre-soldered bare ends for easier integration.
| Brand | Loops |
|---|
The connector has an external diameter of 5.5mm and an internal diameter of 2.1mm.
This cable is generally not compatible with most IP cameras, as they typically use a smaller 3.5mm DC socket. Please verify your camera's power input size before use.
'Bare ends' means the cable is not terminated with a standard connector on one side. Instead, it has exposed, pre-soldered copper strands, allowing you to attach custom connectors or splice it into other wiring.
While the strands are pre-soldered for convenience, you may need basic tools like wire strippers, crimpers, or a soldering iron depending on how you intend to make the connection.
Typically, the outer conductor of the barrel connector is negative, and the inner conductor is positive. For bare ends, you must identify the corresponding wires from your power source and connect them accordingly. Incorrect polarity can damage your device.
This cable is designed for low-current electrical devices. Its suitability for higher power depends on the current rating of the cable itself and the power supply. Always check the specifications of both your power source and your device.
ROHS (Restriction of Hazardous Substances) testing ensures that the product complies with specific environmental and safety standards, limiting the use of certain hazardous materials in its manufacture.
Verify the power source is active and providing the correct voltage. Check that the polarity is correctly connected at both ends (positive to positive, negative to negative). Ensure the bare-end connections are secure and making good contact. Test the cable's continuity with a multimeter if possible.
Inspect the bare-end connections for looseness or corrosion. Ensure the cable is not bent too sharply or damaged along its length. Check the strain relief for any signs of wear or damage.
Confirm that the device's power socket is indeed a 5.5mm x 2.1mm. If it is a different size (e.g., 3.5mm), this cable is incompatible. Ensure the male plug is fully inserted into the female socket.
Setup: To use this cable, identify the positive and negative terminals of your DC power source and the corresponding terminals on your device's power input jack. The bare ends of the cable can be stripped further if necessary, then connected to your power source and device using appropriate connectors (e.g., screw terminals, solder, or custom plugs). Ensure correct polarity is maintained to avoid damaging your equipment. The pre-soldered strands facilitate easier connection.
Compatibility: This cable features a 5.5mm outer diameter and 2.1mm inner diameter male plug. It is compatible with devices featuring a corresponding female 5.5mm x 2.1mm DC input socket. Important: It is *not* compatible with 3.5mm DC sockets commonly found on many IP cameras. Always verify the size of your device's power port before purchasing.
Care: The durable PVC jacket provides basic protection. To prolong the life of the cable, avoid sharp bends, excessive pulling, or exposure to extreme temperatures or moisture. Ensure connections made at the bare ends are secure and protected from environmental factors if used in exposed locations.
