Bosch Aquatak Pressure Washer - Refurbished

This model is best suited for small to medium cleaning jobs. For large driveways, a more powerful unit might be more efficient.

Only use detergents specifically designed for pressure washers and compatible with Bosch machines. Check the product manual for specific recommendations.

It is crucial to drain all water from the pump and hoses to prevent freezing damage. Store the unit indoors in a dry, frost-free environment.

Warranty terms for refurbished products can vary. Please refer to the specific purchase details or contact customer support for information regarding your unit's warranty.

Using a water butt is possible, but ensure it can provide sufficient and consistent water flow. The pressure washer requires a minimum water flow rate to operate correctly. Check the product specifications for these requirements.

The pressure washer typically uses standard garden hose fittings. Simply screw the female end of your garden hose onto the water inlet connection point on the pressure washer.

Check that the power cord is securely plugged into a working outlet. Ensure the power switch is in the 'on' position. Verify that the water supply is on.

Ensure the water supply is fully turned on and the hose is not kinked. Check and clean the water inlet filter for blockages. Purge air from the system by running water through the trigger gun before powering on the unit.

Ensure all hose connections (water inlet, high-pressure hose, trigger gun) are tightened securely. Check O-rings and seals for damage and replace if necessary.

The unit may have overheated. Turn off the pressure washer and allow it to cool down for at least 15-20 minutes before restarting. Ensure air vents are not blocked.