Ambersil Freezer Spray - 400ml

Shake the can well and spray directly onto the suspect electronic component for a few seconds. Observe if the fault in the equipment temporarily disappears. If it does, the sprayed component is likely defective and needs replacement.

The spray rapidly cools the targeted area, typically to around -40°C to -50°C. The exact temperature depends on ambient conditions and application duration.

It is designed for use on common electronic components. However, always exercise caution and spray in short bursts. Avoid direct prolonged spraying on extremely sensitive or delicate parts without prior testing.

The frosting effect is temporary and dissipates quickly as the temperature returns to ambient levels, which is a characteristic of its rapid-acting formulation.

Yes, it can help make sticky substances like chewing gum brittle, making them easier to remove. Spray onto the residue, wait for it to harden, and then scrape it off.

No, the Ambersil Freezer Spray is formulated without the use of any CFCs or HCFCs, making it an environmentally responsible choice.

Typically, the product has a shelf life of 24 months when stored correctly in a cool, dry place away from heat sources. Refer to the can for specific expiry information.

Ensure the can is shaken thoroughly before use. Check that the nozzle is not blocked. Spray from a closer distance if necessary, but maintain a safe distance to avoid over-saturation.

The rapid dissipation is a feature, indicating the product's fast-acting nature. Reapply if continuous cooling is needed for extended diagnostics.

The component may not be the sole cause of the fault, or the fault might not be temperature-sensitive. Consider other components or potential issues.

Check that the nozzle is properly attached and not clogged. If clogged, remove and clean the nozzle. Ensure the can is adequately shaken.