Best current price£305.29from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£305.29Visit shop Festo Mini Slide 10Mm Bore 20Mm Stroke Double Acting - 8078840
Visit shop12 offers from £305.29 - £479.00
View price history by clicking the chart icon.
The Festo Mini Slide DGST-25-50-E1A is a compact, double-acting pneumatic actuator designed for automated systems requiring precise linear motion in space-constrained environments. Its key benefit is delivering high precision with efficient operation, but users should be aware of its maximum operating pressure limit of 8 bar. This actuator features a 25 mm piston diameter and 50 mm stroke, offering a theoretical advancing force of 589 N at 6 bar, complemented by elastomer cushioning for smooth end-of-stroke transitions and integrated compatibility with proximity sensors for position monitoring.
| Series | DGST |
|---|---|
| Model Part Number | DGST-25-50-E1A |
| Brand | Festo |
The maximum operating pressure for this model is 8 bar.
The theoretical advancing force at 6 bar is 589 N.
The DGST series is designed to operate reliably with or without lubrication, but using clean, dry air is recommended.
Proximity sensors are typically mounted in slots or designated areas on the actuator body and sense the position of the piston rod or a magnet within it.
Double-acting means that compressed air is used to both extend and retract the piston rod.
Elastomer cushioning absorbs the impact at the end of the stroke, providing a smoother stop and reducing wear on the actuator.
The recirculating ball bearing guide provides high precision and rigidity for linear movement.
Check compressed air supply pressure and flow. Ensure pneumatic lines are correctly connected to the ports for the desired direction of movement. Verify control valves are functioning correctly.
Verify air pressure is adequate (within the 8 bar limit). Check for kinks or restrictions in pneumatic lines. Ensure the air supply is clean and free from contaminants. Elastomer cushioning might be worn if the issue is at the end of stroke.
Confirm the sensor is correctly installed and aligned with the actuator's piston rod or designated sensing area. Check sensor wiring and its connection to the control system. Ensure the correct sensor type is used and compatible with the actuator's stroke.
Inspect pneumatic connections for tightness. Check seals at port connections. If leakage is internal (e.g., from the piston seal), the actuator may require service or replacement.
Setup: Ensure the actuator is securely mounted using appropriate brackets that align with its mounting points. Connect the pneumatic lines to the designated ports. Use clean, dry compressed air, ideally filtered and lubricated according to Festo recommendations, though the DGST series often operates well without lubrication. Connect proximity sensors to your control system. Test the movement by applying air pressure to the respective ports.
Compatibility: This actuator is compatible with standard pneumatic control systems. Ensure your compressed air supply meets the maximum operating pressure of 8 bar. Proximity sensors compatible with Festo actuators (e.g., SMT-8M) can be used for position sensing.
Care: Regularly inspect pneumatic connections for leaks. Keep the external surfaces clean using a dry or slightly damp cloth. Avoid using harsh solvents. If operating in dusty environments, ensure the guide rod and bearing are protected from debris. Periodically check the function of the elastomer cushioning.
