Stonelux Fireplace Paint - Rockingham 58 - 130ml

Stonelux Fireplace Paint is designed for areas exposed to higher temperatures, such as surrounds and back panels. It is not intended for direct flame contact. Always follow the stove manufacturer's safety guidelines regarding clearances and materials.

Typically, two coats are recommended for optimal coverage and to achieve the desired stone effect. Allow sufficient drying time between coats as per the product instructions.

Yes, Stonelux Fireplace Paint is suitable for use on fireplace surrounds, back panels, and hearths of gas and electric fireplaces.

The paint is washable. You can remove dust with a vacuum cleaner's brush attachment. For tougher dirt, use a soft brush with mild soap and water.

The variants differ in color (e.g., Rockingham 58, Grey 50, Limestone 00) and size (e.g., 130ml, 5 Litre, 10 Litre), allowing you to choose the right amount and shade for your project.

Yes, the paint can be applied using a spray gun. Ensure you follow appropriate spraying techniques and safety precautions.

The durability depends on the heat exposure and maintenance. In areas with consistent high heat, touch-ups or reapplication may be needed over time. For standard use, the finish is designed to be long-lasting.

Ensure the surface was properly cleaned, dry, and free from dust or grease before application. Lightly sand any glossy surfaces.

Stir the paint thoroughly before and during application. Apply in consistent, even coats. Consider a test patch in an inconspicuous area first.

Use a high-quality brush and apply in smooth, consistent strokes. Consider using a roller or spray for larger areas. Avoid overworking the paint.

Ensure the paint was applied in appropriate conditions and allowed to cure fully. Reapply if necessary, following preparation guidelines.