Best current price£349.99from eBay
Shopping.co.uk recommended and popular offers
eBay£349.99Visit shop TP-Link JetStream TL-SG3452 48-Port Metal Gigabit L2 Managed Switch with 4 SFP S
Visit shop9 offers from £349.99 - £653.17
View price history by clicking the chart icon.
The TP-Link JetStream TL-SG3452P is a high-performance, managed L2/L3 switch designed for businesses needing robust network infrastructure. It offers 48 PoE+ ports for powering devices, a 104 Gbps switching capacity, and advanced management features for efficient control and security. A potential consideration is its reliance on a web-based interface and command-line for deeper configuration, which may require a learning curve for some users.
| Series | JetStream |
|---|---|
| Model Part Number | TL-SG3452P |
| Brand | TP-LINK |
The TL-SG3452P has a total PoE budget of 384W. Each of the 48 PoE+ ports can supply up to 30W.
Locate the reset button (usually a small pinhole) on the front or back panel. With the switch powered on, press and hold the reset button using a paperclip for approximately 10-15 seconds until the system LEDs indicate a reset. Note that this will erase all current configurations.
The switch has dimensions of 440 mm (width) × 330 mm (depth) × 44 mm (height).
Yes, the TL-SG3452P is a managed L2/L3 switch and supports IP routing, including static routes.
The switch supports a MAC address table size of up to 16,000 entries.
You can manage the switch remotely using its web-based interface, or via SNMPv1/v2c/v3, and SSH/SSL protocols. Ensure appropriate firewall rules are in place for secure remote access.
Yes, the switch supports Jumbo Frames up to 9000 bytes, which can improve performance for large data transfers.
Ensure the power cord is securely connected to the switch and a working power outlet. Verify the power supply is correctly installed.
Check that network cables are properly connected at both ends. Verify the connected device's network settings. Test the cable with another device. Ensure the port is enabled in the switch configuration.
Confirm the device is PoE/PoE+ compliant. Check the PoE power budget; ensure it is not exceeded by the total power draw of connected devices. Verify PoE is enabled on the specific port in the switch configuration.
Check for network loops. Ensure link aggregation is configured correctly if used. Monitor switch CPU and memory usage via the management interface. Update firmware to the latest version.
Verify your computer is connected to the same network segment as the switch. Check the IP address of your computer and ensure it is in the same subnet as the switch. Try accessing via the console port. Reset the switch to factory defaults if necessary.
Setup:
Compatibility:
Care:
