Rustins Danish Oil - 5 Litre

Rustins Danish Oil is formulated to provide a natural, soft, low-lustre finish, while Rustins Teak Oil is designed to provide a glossier finish and may contain additional water-repellent properties suitable for some exterior applications.

While it can be used on wooden surfaces, for kitchen worktops that experience significant moisture and heat, a more robust finish like a dedicated worktop oil or varnish might be more suitable. If used, regular reapplication will be necessary.

Typically, 3-4 coats are recommended for adequate protection and a desirable finish. However, this can vary depending on the type of wood and the desired level of protection and sheen. Allow adequate drying time between coats.

It is best applied to bare wood. If an old finish is present, it must be completely removed by sanding or stripping before applying Danish Oil.

Rustins Danish Oil is primarily intended for interior use. For exterior applications, specific exterior wood oils or treatments are generally recommended to provide better weather resistance.

Clean brushes and cloths immediately after use with mineral spirits or white spirit. Dispose of oily rags safely, as they can pose a fire risk due to spontaneous combustion.

Yes, like most oil finishes, Danish Oil tends to darken woods slightly, enhancing their natural color and bringing out a warmer tone. This effect is more pronounced on lighter woods.

Ensure the wood is evenly porous. Apply the oil liberally and wipe off all excess thoroughly after the penetration time. For very porous woods, pre-seal with a thinned coat of the Danish Oil or a specialized wood sealer.

This indicates excess oil was not fully wiped off. Buff the surface with a clean cloth. If still sticky, lightly sand the area and reapply a thin coat, ensuring all excess is removed.

Apply another coat of Danish Oil, ensuring excess is removed. For a slightly richer sheen, consider using Rustins Teak Oil for subsequent coats if a glossier finish is acceptable.

Ensure the application area has adequate ventilation and is at a moderate room temperature. Thick application or insufficient wiping of excess can slow drying. In humid or cold conditions, drying times will be extended.