Best current price£61.45from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£61.45Visit shop Eltako Radio Frequency Receiver Switchgear - 30100540
Visit shop3 offers from £61.45 - £85.08
View price history by clicking the chart icon.
The Eltako FR62 (model 30100540) is a versatile radio frequency receiver designed for panel mounting, acting as a wireless relay actuator. It's ideal for smart home integrations and automation projects requiring wireless control of lighting or appliances, offering a low standby loss of just 0.4 watts. A key caveat is that it requires local 230V AC for supply, switching, and control voltage, and a defined cut-off occurs upon power restoration.
| Series | FR62 |
|---|---|
| Model Part Number | 30100540 |
| Brand | Eltako |
The Eltako FR62 can handle a maximum load of 10A at 250V AC.
No, it is designed to work with Eltako wireless buttons and window contacts operating on the 868MHz frequency and supporting up to 32 commands.
A potential-free contact means the relay output is isolated from the device's internal power supply, allowing it to be used with different voltage levels or as a simple switch.
The contact function can be set to NO or NC when not in use, typically through a configuration setting or wiring choice during setup, as per the product manual.
The standby loss is very low, at only 0.4 watts.
No, the Eltako FR62 is a switching actuator and is not designed for dimming functions. Glow lamp current is also not permitted.
The switch position is maintained if the supply voltage fails. Upon restoration of the supply voltage, a defined cut-off is performed.
The automatic short synchronization is a process that occurs after installation. You must wait for this to complete before connecting the switched load to the mains to ensure proper initialization.
Verify the 230V AC power supply is connected and stable. Check if the wireless buttons/contacts are within range and properly paired. Ensure the maximum of 32 commands has not been exceeded.
Confirm the load is within the 10A/250V AC rating. Check the NO/NC configuration of the contact. Ensure the power supply and control voltage are correctly wired and active.
Verify that the device is receiving continuous 230V AC supply. The switch position is maintained if supply fails, but a defined cut-off happens upon restoration, which is normal behavior. Ensure no external control is overriding the memory function.
Check the wiring for the local 230V control button. Ensure the button is functioning correctly and compatible with pulse button operation.
Setup:
Compatibility:
Care:
