Best current price£23.86from eBay
Shopping.co.uk recommended and popular offers
eBay£23.86Visit shop Varilight XDY9S.PD Screwless Primed 4 Gang 10A 1 or 2 Way Rocker Light Switch
Visit shop
The Range£24.03Visit shop Varilight Xdy9s.pd Screwless Primed 4 Gang 10A 1 Or 2 Way Rocker Light Switch - Primed White
Visit shop4 offers from £23.86 - £27.53
View price history by clicking the chart icon.
The Varilight XDY9S.PD is an ideal choice for homeowners and interior designers seeking a minimalist, modern aesthetic for their lighting controls. This 4-gang rocker switch offers reliable 1- or 2-way control for multiple lighting circuits, featuring a seamless, screwless faceplate that fits flush against the wall. While its sleek design elevates room decor, users should note that the primed white finish is designed for easy integration but requires careful handling during installation to prevent scuffs on the matte surface.
| Colour | White |
|---|---|
| Model Part Number | XDY9S.PD |
| Brand | Varilight |
Yes, this switch is suitable for both mains and low voltage lighting systems.
No, this is a standard 4-gang rocker switch and does not provide dimming functionality.
The switch has a depth of 25mm, which is standard for most electrical back boxes.
Yes, the internal metal frame includes standard screws to secure it to the electrical back box.
The switch comes with a high-quality primed white finish, but painting it is not recommended as it may affect the snap-fit tolerance of the screwless cover.
Ensure the internal metal frame is secured tightly to the wall box before snapping on the decorative cover.
Check all terminal connections to ensure wires are fully inserted and tightened; if flickering persists, ensure the lighting load is within the switch's rated capacity.
Look for the small notch on the edge of the frame and use a thin plastic prying tool to gently pop the plate off.
Installation of the XDY9S.PD should always be performed by a qualified electrician to ensure compliance with local electrical safety regulations. Before installation, ensure the power is isolated at the mains. The unit fits into a standard 25mm back box; ensure your wiring is correctly identified before connecting to the L1, L2, and Common terminals.
For maintenance, use a soft, dry cloth to clean the faceplate. Avoid abrasive chemical cleaners or scouring pads, as these will damage the primed white finish. If the faceplate needs to be removed, use a small flat-head screwdriver at the designated pry point to gently release the clips.
