Best current price£8.45from Elesi.com
Shopping.co.uk recommended and popular offers
Elesi.com£8.45Visit shop Soho Lighting Black/Light Antique Brass 20Ax 2 Way And Off Rm-Grid Switch Module
Visit shop2 offers from £8.45 - £8.95
View price history by clicking the chart icon.
This Soho Lighting 20A Double Pole RM-Grid Switch Module, finished in Antique Brass, is designed for users needing to safely and simultaneously isolate appliances like cooker hoods from both live and neutral terminals. It offers a customizable solution for kitchens and utility areas, allowing you to build bespoke switch banks. While highly versatile with RM and Dual Grid Plates, it's crucial to note its incompatibility with CM, EM, LT1, LT2, or LT3 plates.
| Model Part Number | 5056361204514 |
|---|---|
| Brand | Soho Lighting |
A double pole switch disconnects both the live and neutral wires of an appliance simultaneously, providing a more complete isolation than a single pole switch.
This switch is specifically marked for cooker hoods and is rated at 20A. While it can isolate appliances, it's best used for high-draw items like cooker hoods where double pole isolation is beneficial. Always check the appliance's power requirements.
RM-Grid refers to Soho Lighting's Grid system modules and plates designed for specific configurations, while CM-Grid refers to a different, incompatible system within their range. This module only works with RM and Dual (RM+CM) Grid Plates.
You need to purchase the appropriate Soho Lighting Grid Plate (RM or Dual RM+CM) and then select individual RM-Grid modules (like this cooker hood switch, standard switches, dimmers, etc.) that snap into the plate to create your desired layout.
Yes, this module can be part of a custom bank alongside dimmer modules, provided you are using a compatible RM or Dual (RM+CM) Grid Plate system.
Please refer to the product packaging or the Soho Lighting website for specific warranty information, as it may vary.
No, RM modules (like this one) and CM modules are not interchangeable and cannot be mixed on the same grid plate. You must use either RM or CM compatible components according to the plate type.
Ensure the module is correctly seated within the grid plate and that no wires are obstructing the mechanism. Check for debris around the toggle.
Verify that the module is correctly wired to both the live and neutral terminals of the appliance. Double-check that the correct grid plate system is being used and that the module is fully engaged. Consult a qualified electrician if the issue persists.
Confirm that you are using a compatible RM or Dual (RM+CM) Grid Plate from Soho Lighting. Ensure no plastic clips or edges on the module or plate are damaged.
Setup: This module is designed to be fitted into a Soho Lighting RM or Dual (RM+CM) Grid Plate. Ensure the grid plate is securely mounted to the wall. Carefully connect the appliance's live and neutral wires to the designated terminals on the switch module, following standard electrical wiring practices and safety precautions. Refer to the Soho Lighting Grid Plate system instructions for detailed assembly.
Compatibility: This RM-Grid Switch Module is only compatible with:
It is not compatible with:
It is designed to fit Soho Lighting screwless antique brass plates.
Care: To clean the module and its surrounding plate, use a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents, as they can damage the antique brass finish. Ensure the power is switched off at the mains before cleaning.
