Best current price£93.14from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£93.14Visit shop Tektronix TPP0200 Passive Voltage Probe 10:1 200 MHz
Visit shop3 offers from £93.14 - £112.05
View price history by clicking the chart icon.
The Tektronix TPP0200 is a high-performance 200MHz passive 10x voltage probe specifically designed for engineers and technicians requiring reliable measurements in low-frequency computer, telecom, power supply, and amplifier testing environments. It provides high signal integrity for BNC-based oscilloscopes featuring a 1MΩ/13pF input; however, users should note that it is physically optimized for specific input impedance and capacitance, making it less ideal for oscilloscopes outside of these exact specifications.
| Model Part Number | TPP0200 |
|---|---|
| Brand | Tektronix |
It is optimized for oscilloscopes with 1MΩ/13pF input specifications. Use with other inputs may result in improper frequency response.
The TPP0200 is a fixed 10x attenuation probe.
The probe is designed for standard low-frequency applications and must be used within the limits defined by its UL61010-031 safety rating.
You should check and adjust compensation whenever you move the probe to a different channel or a different oscilloscope.
The probe supports a bandwidth up to 200MHz.
Perform a probe compensation adjustment using the oscilloscope's calibration terminal.
Verify that the oscilloscope probe menu setting is configured to 10x attenuation.
Ensure the ground clip is attached to a solid reference ground near the measurement point.
To set up the TPP0200, simply connect the BNC end to your oscilloscope input. Before first use, locate the adjustment screw on the probe body to perform a low-frequency compensation using the oscilloscope’s built-in square wave calibrator. Compatibility is strictly limited to instruments with a 1MΩ input impedance and 13pF input capacitance; using this probe with incompatible inputs will result in signal ringing or measurement errors. For care, keep the cable away from sharp edges, do not exceed the voltage rating, and store the probe in a clean environment to prevent contact oxidation.
