Simoniz Acrylic White Primer - 500ml

Simoniz Acrylic White Primer is suitable for use on wood, metals, and plastics.

Clean the surface thoroughly to remove any dirt, grease, or rust. Sand the surface lightly for better adhesion.

Drying time varies, but it typically takes a few hours. Check the product label for specific drying times under different conditions.

Yes, it is compatible with most common paints. However, it's always a good idea to check the paint manufacturer's recommendations.

One or two thin coats are usually sufficient. For best results, apply multiple thin coats rather than one thick coat.

Store the can in a cool, dry place away from extreme temperatures and direct sunlight.

Turn the can upside down and spray for a few seconds to clear the nozzle. If it remains clogged, try cleaning it with a pin or replace the nozzle.

Ensure the surface is properly cleaned and sanded before application. Allow adequate drying time between coats.

Apply the primer in thin, even coats. Avoid holding the can too close to the surface or applying too much primer in one area.

Ensure all existing rust is removed before priming. Apply a second coat of primer.