Microwave Oven High Voltage Fuse Tube - 750mA

Replacement 750mA 5kV high voltage fuse tube designed for modern microwave ovens. This fuse is wir...

Best current price£1.99from eBay

All Offers

2 offers from £1.99

View price history by clicking the chart icon.

eBayMicrowave Oven High Voltage Fuse Tube 800mA 0.8A 5kV
Free delivery in 1–3 days
£1.99
Visit shop

Product Information

Full details

This 750mA 5kV high voltage fuse tube from TheOneStopSatShop is designed for homeowners and repair technicians looking to restore heating functionality in modern microwave ovens. It acts as a critical safety component wired in series between the transformer and the magnetron, effectively protecting the high voltage circuit. Please note that this component involves high voltage electrical systems and should only be handled, purchased, and installed by competent personnel with appropriate electrical training.

All features

Model Part Number750mA
BrandTheOneStopSatShop

Extended Product Information

FAQs

Can I use this for any microwave brand?

This fuse is compatible with most brands, but you must ensure your microwave specifically requires a 750mA 5kV rated fuse.

How do I know if the fuse is blown?

You can visually inspect the internal filament of the glass tube. If it is broken or the glass is blackened, the fuse is blown. Use a multimeter set to continuity mode to confirm.

What is the difference between this and the 800mA fuse?

The main difference is the current rating. You must use the exact amperage rating specified by your microwave manufacturer to ensure safe operation.

Is this fuse difficult to install?

It is physically simple to snap into place, but the process is electrically dangerous due to high-voltage components. Only trained personnel should perform the installation.

Where is the fuse located?

It is typically located inside the microwave chassis, wired in series between the transformer and the magnetron.

Troubleshooting

Fuse blows immediately after installation

This often indicates a short circuit in the magnetron or the high-voltage capacitor. Check these components for damage.

Microwave still does not heat after replacement

Verify the door interlock switches are functioning correctly or inspect the magnetron for signs of burnout.

Pros and Cons

Pros

  • Cost-effective solution for common microwave heating failures
  • Compatible with a wide range of microwave manufacturers
  • Easy visual inspection of the fuse state through the glass housing
  • Standardized 6.5mm x 40mm size for broad compatibility

Cons

  • Installation requires advanced electrical safety knowledge
  • Requires proper discharge of the high-voltage capacitor before access
  • Not intended for DIYers without technical training

Setup, Compatibility & Care

Safety Warning: Always unplug the microwave from the power outlet and discharge the high-voltage capacitor before opening the chassis. Failure to do so can result in serious electrical shock.

  1. Compatibility Check: Verify your original fuse is marked 750mA 5kV. If your unit requires a different amperage, such as the 800mA model, ensure you select the correct specification.
  2. Installation: Access the high-voltage section near the transformer, remove the old fuse from its inline holder, and snap the new 6.5mm x 40mm fuse into place.
  3. Care: Keep the fuse housing clean and ensure the wire connections to the fuse holder are tight to prevent arcing and premature failure.

Price History

DatePrice
Visit shop