Primaflow Prima Plus Endfeed Long Street Bend - 90' 15mm - Pack Of 25

The Primaflow Prima Plus Endfeed fittings are manufactured to EN 1254 standard and are Kite Marked, adhering to the highest British Standards (BS).

Yes, these fittings are fully WRAS approved, meaning they are certified for use with potable (drinking) water supplies.

This is an endfeed fitting designed specifically for 15mm copper pipe.

This fitting provides a 90-degree bend.

Yes, these fittings are suitable for both water and gas installations, provided they are installed in accordance with relevant regulations.

Each pack contains 25 individual fittings.

A long street bend provides a gentler, longer radius curve compared to a standard bend, which can help to reduce flow resistance and pressure loss in the pipe system.

Ensure pipe and fitting are clean, properly fluxed, and heated evenly. Check that the pipe is fully inserted into the fitting socket. Avoid overheating, which can burn off the flux.

The joint may not have been properly heated or filled with solder. Carefully drain the system, reheat the joint, and re-solder. If the leak persists, the fitting may be damaged and require replacement.

This is likely due to external heat during soldering. Ensure adequate heat shielding is used. Minor discoloration typically does not affect performance but can be cleaned with appropriate metal polish if desired for aesthetic reasons.