Bonda G4 Clear Pond Sealer - Rustins - 25kg
Best current price£351.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£351.99Visit shop B&Q - Bonda G4 Pond SealerClear 25Kg
Visit shopB&Q£351.99Visit shop One Offer
1 offer from £351.99
View price history by clicking the chart icon.
Product Information
Full details
This guide is for anyone needing to seal concrete ponds or cement-rendered surfaces. The Rustins Bonda G4 Clear Pond Sealer provides a tough, flexible coating that stops leaks and seals porosity. A key benefit is its application flexibility, allowing use at low temperatures. However, it requires careful surface preparation for optimal adhesion.
All features
| Brand | Rustins |
|---|
Extended Product Information
FAQs
Can Bonda G4 be used on plaster?
Bonda G4 is specifically designed for cement-rendered surfaces and concrete. While it may adhere to some plasters, compatibility and performance can vary significantly. Testing in an inconspicuous area is recommended.
What is the coverage rate of the 25kg tub?
Coverage varies depending on the porosity and texture of the surface. Refer to the product's technical data sheet for specific coverage estimates per square meter per coat.
How long does Bonda G4 take to cure?
Curing time depends on ambient temperature and humidity. Typically, it becomes tack-free within 24 hours and fully cures in 48-72 hours, but always consult the product's instructions for precise details.
Can I apply Bonda G4 over an existing pond coating?
It is best to remove any old, failing coating. If the existing coating is sound and well-adhered, abrading the surface and cleaning thoroughly may allow for adhesion, but a test patch is highly advisable.
Is Bonda G4 safe for fish and plants?
Once fully cured, Bonda G4 is designed to be safe for use in ponds. Ensure the product is completely dry and cured according to the manufacturer's instructions before introducing aquatic life.
Can I apply Bonda G4 in cold weather?
Yes, Bonda G4 can be applied at temperatures as low as 0°C, provided the surface is dry and condensation is not forming.
What is the shelf life of Bonda G4?
Unopened containers typically have a shelf life of 12 months when stored in cool, dry conditions. Refer to the packaging for the exact expiry date.
Troubleshooting
Sealer is not adhering well to the surface.
Ensure the concrete surface was completely clean, dry, and free from contaminants (dust, oil, grease) before application. Re-prepare the surface and reapply.
Bubbles appearing in the coating.
This can be caused by applying to a damp surface or by trapped air during application. Ensure the surface is bone dry and apply thinly and evenly, avoiding overworking the product.
Uneven finish or color.
Ensure the product was thoroughly stirred before and during application. Apply coats evenly and consistently. Ensure previous coats are fully cured before applying the next.
Sealer remains tacky after application.
This is likely due to low temperatures, high humidity, or insufficient air circulation during curing. Ensure application and curing occur within the recommended temperature and humidity range and allow for adequate ventilation. Avoid over-application.
Pros and Cons
Pros
- Provides a durable and flexible waterproof seal.
- Can be applied in cold weather conditions (down to 0°C).
- Seals out harmful lime leaching from concrete.
- Suitable for both new and existing concrete pond structures.
- Helps to protect the concrete substrate from water damage.
Cons
- Requires thorough surface preparation for best results.
- 25kg is a large quantity for small projects.
- Specific application conditions must be met for optimal performance.
- May require multiple coats for complete coverage on very porous surfaces.
Setup, Compatibility & Care
Preparation is Key: Before application, the concrete surface must be clean, dry, and free from any dust, grease, oil, or loose debris. Old coatings or algae should be removed. If applying to a previously coated surface, ensure good adhesion by testing compatibility or removing the old coating.
Application: Apply using a brush, roller, or squeegee. For porous surfaces, a second coat may be necessary after the first has dried tack-free (typically 24 hours, depending on temperature and humidity). Ensure even application to avoid missed spots. Stir the product thoroughly before and during use.
Compatibility: Primarily designed for use on cement-rendered surfaces and concrete. Not suitable for use on plastics or flexible liners unless specifically tested.
Curing: Allow the sealer to cure fully before introducing water or aquatic life. Curing times vary based on temperature and humidity; refer to product packaging for specific details. Generally, allow at least 48-72 hours for full cure in temperate conditions.
Care: Once cured, the sealed surface is relatively low maintenance. Clean with water. Avoid abrasive cleaners or tools that could damage the coating.