Best current price£18.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£18.99Visit shop (Selenite Metallic) Plasti Dip Rubber Paint - Luxury Metal Colours Gray 075815113573
Visit shop2 offers from £18.99
View price history by clicking the chart icon.
This Plasti Dip Luxury Metal Aerosol in Selenite Gray Metallic is for DIY enthusiasts and car customizers looking to achieve a unique, durable metallic finish. Its key benefit is providing a flexible, protective coating that won't chip or crack, offering a striking aesthetic with practical advantages. A potential caveat is the learning curve for achieving a perfectly smooth, even finish.
| Brand | Plasti Dip |
|---|
Durability varies based on application, number of coats, and environmental exposure. Properly applied and maintained, it can last for several years, resisting weather, chemicals, and UV rays.
Yes, Plasti Dip can be applied over most factory and original paint surfaces. Ensure the existing paint is in good condition, clean, and well-adhered. Test in an inconspicuous area first.
No, Plasti Dip is designed to be a temporary, peelable coating. It can be removed cleanly without damaging the underlying surface if applied correctly and in sufficient thickness.
Allow approximately 10-15 minutes of drying time between coats. The surface should feel dry to the touch before applying the next coat.
Typically, 2-3 cans are sufficient for a set of four standard-sized car wheels, applying 4-6 coats per wheel.
It is not recommended. Regular spray paint may not adhere well to the Plasti Dip surface and can be difficult to remove later. It's best to remove the Plasti Dip first if you want to apply a different finish.
Yes, Plasti Dip provides electrical insulation properties, making it suitable for tool handles and certain electronic applications where a non-conductive barrier is beneficial.
Ensure the surface is properly cleaned and free of contaminants. Increase the distance slightly between the can and the surface, and apply thinner, more even coats.
Ensure enough coats were applied (minimum 4-6 recommended). The surface may not have been adequately prepared, or the coating may have been exposed to harsh chemicals.
Shake the can more frequently during use. Ensure the nozzle is not clogged; if it is, try cleaning it with a solvent or rotating the can 180 degrees and spraying briefly to clear.
Ensure the coating is thick enough. If it's thin, it may tear. Gently peel from an edge, using a bit of heat from a hairdryer can sometimes help soften it for easier removal. If stubborn residue remains, use a dedicated Plasti Dip remover.
Setup:
Compatibility:
Plasti Dip can be applied to most surfaces including metal, plastic, wood, glass, concrete, and fabric. It is not recommended for use on surfaces that experience extremely high heat (e.g., exhaust manifolds) or areas with excessive friction.
Care:
Clean with mild soap and water. Avoid harsh solvents or abrasive cleaners that could damage the coating. If a section becomes damaged, it can typically be spot-repaired or the entire piece can be peeled and re-coated.
