BLACKGLASS IX Car Window Tinting Film - B270
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The BLACKGLASS IX B270 car window tinting film is designed for DIY enthusiasts and automotive hobbyists looking to achieve a professional-grade finish for enhanced heat rejection, privacy, and UV protection. This 2-ply self-adhesive film excels in flexibility and heat-forming capabilities, making it easier to apply on curved vehicle glass, though users should be prepared for the precision-focused nature of tint installation to avoid common application defects.
All features
| Model Part Number | B270 |
|---|---|
| Brand | BLACKGLASS IX |
Extended Product Information
FAQs
Can I apply this to the exterior of the window?
No, this film is designed exclusively for interior application to protect it from weather and wiper blade damage.
How long does the film take to cure?
The adhesive typically takes 3-5 days to fully cure depending on local humidity and temperature.
Will this film turn purple over time?
The BLACKGLASS IX series features superior color stability technology designed to prevent the purple discoloration common in low-quality films.
Is this film safe for defroster lines?
Yes, the film is safe to use over rear-window defroster elements.
Do I need a heat gun for installation?
Yes, a heat gun is highly recommended to shrink the film to fit the natural curves of automotive glass.
Troubleshooting
Air bubbles trapped under the film
Use a squeegee to gently push the air toward the nearest edge. If small bubbles remain, wait 24-48 hours as they may disappear as the moisture evaporates.
Film edges peeling shortly after install
This is usually caused by leftover soap residue or insufficient drying. Use a heat gun on low to lightly re-warm the edge and press firmly with a squeegee.
Visible debris under the film
Unfortunately, debris cannot be removed once the film is applied. Ensure the glass is cleaned three times before laying the film in the future.
Pros and Cons
Pros
- High-grade 2-ply material resists tearing
- Excellent heat-shrinking capabilities for curved glass
- Professional-grade color stability
- Effective reduction of interior solar heat
- Durable scratch-resistant surface layer
Cons
- Requires significant practice for flawless results
- Sensitive to dust during the application process
- Trimming requires a very sharp utility blade to prevent fraying
Setup, Compatibility & Care
Installation Preparation
Ensure your workspace is dust-free and shaded. Clean the interior of the car windows using a lint-free cloth and a mild soapy solution to remove any oils or residues. Use a squeegee to remove all bubbles and water from underneath the film once positioned.
Compatibility
The film is compatible with most standard automotive glass. Ensure the glass surface is smooth and free from damage before application.
Care Instructions
For the first 3-5 days after application, keep the windows closed to allow the adhesive to fully cure. After the curing period, clean the tinted windows using only non-ammonia based glass cleaners and a soft microfiber cloth to avoid scratching the surface or degrading the adhesive.