Engine Oil - 5W-30 C3 C2 LS - 1 Litre - EXOPRO U230S1L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide provides essential information for users of EXOPRO Engine Oil 5W-30 C3 C2 LS, a high-performance, fully synthetic engine oil designed for a wide range of modern petrol and diesel engines. It offers excellent temperature stability and extended drain intervals, which is ideal for vehicles with after-treatment systems. Always verify oil specifications and viscosity against your vehicle's owner's handbook for compatibility before use.
All features
| Model Part Number | U230S1L |
|---|---|
| Brand | EXOPRO |
Extended Product Information
FAQs
What does '5W-30' mean?
5W-30 refers to the oil's viscosity grade. The '5W' indicates the oil's viscosity at low temperatures (winter), while '30' indicates the viscosity at operating temperatures. This oil provides good performance in varying temperatures.
How often should I change the oil?
Follow the oil change intervals recommended in your vehicle's owner's manual or as advised by EXOPRO, whichever is sooner. These intervals are typically based on mileage or time.
Is this oil suitable for my diesel engine?
EXOPRO Engine Oil 5W-30 C3 C2 LS is suitable for many modern diesel engines, but always check your vehicle's manual to confirm compatibility.
What are the benefits of a fully synthetic oil?
Fully synthetic oils offer superior performance in terms of high and low-temperature stability, wear protection, and extended drain intervals compared to conventional oils.
Can I mix this oil with other types?
It's generally not recommended to mix different types of oil. However, in an emergency, it is okay to top off with a compatible oil until the next scheduled oil change.
How should I dispose of used oil?
Used oil should be taken to a recycling center or local waste disposal facility that accepts used automotive fluids. Never pour oil down the drain or into the environment.
What is C3 C2 LS?
C3 C2 LS refers to the oil's specification, which indicates the quality and performance standards met by the oil, including compatibility with after-treatment systems.
Where can I find the correct oil specification for my vehicle?
The correct oil specification can be found in your vehicle's owner's manual. It is essential to refer to your manual for the correct grade and specification.
Troubleshooting
Engine oil light on after oil change.
Check the oil level with the dipstick and top up if needed. Ensure the oil filter is properly installed and that there are no leaks.
Excessive oil consumption.
Check for leaks. If no leaks are found, the engine may be burning oil, which could require professional inspection.
Engine performance issues after oil change.
Ensure you used the correct oil specification as per your vehicle's manual. Consider consulting a mechanic.
Pros and Cons
Pros
- Excellent high and low-temperature stability.
- Extended drain intervals save time and money.
- Compatible with a wide range of modern engines.
- Helps to maintain after-treatment systems.
- Formulated with high-quality virgin base oils.
Cons
- Requires verifying compatibility with your vehicle's handbook.
- May not be suitable for all engine types.
- Proper disposal of used oil is required.
Setup, Compatibility & Care
Setup
- Ensure your vehicle is parked on a level surface.
- Warm up the engine for a few minutes before turning it off.
- Locate the oil filler cap on your engine.
- Place a drain pan under the oil drain plug.
- Unscrew the oil drain plug and allow the old oil to drain completely.
- Replace the drain plug with a new crush washer.
- Remove the old oil filter and install a new one.
- Remove the oil filler cap and add the correct amount of EXOPRO Engine Oil, as specified in your vehicle's owner's manual.
- Check the oil level with the dipstick and top up if necessary.
- Start the engine and check for leaks.
Compatibility
- Verify compatibility: Always consult your vehicle's owner's manual to ensure that 5W-30 C3 C2 LS is the correct oil specification for your engine.
- Engine Types: Suitable for modern petrol and diesel engines.
- After-Treatment Systems: Compatible with vehicles equipped with after-treatment systems.
Care
- Regular Checks: Check the oil level regularly using the dipstick.
- Oil Changes: Adhere to the oil change intervals recommended in your vehicle's manual or by EXOPRO, whichever is sooner.
- Disposal: Dispose of used oil and filters responsibly, in accordance with local environmental regulations.