Best current price£7.72from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.72Visit shop B&Q - Pro Signal3.5mm Stereo Jack Plug To 2X 6.35mm (1/4") Mono Jack Plugs Lead3M
Visit shop2 offers from £7.72 - £8.70
View price history by clicking the chart icon.
The ProSignal 3.5mm to Dual 6.35mm Mono Jack Lead is designed for musicians, studio engineers, and audio enthusiasts who need to bridge consumer-grade portable devices with professional mixing consoles, amplifiers, or audio interfaces. Providing a robust 3-meter reach, this cable ensures clean, reliable signal transmission through its high-quality pure copper conductors; however, users should ensure their target equipment supports unbalanced mono inputs to achieve the best results without signal phase cancellation.
| Colour | Black |
|---|---|
| Model Part Number | PSG00027 |
| Brand | PROSIGNAL |
No, this cable is designed for stereo output (e.g., laptop) to mono input (e.g., mixer/amp). Connecting a mono guitar signal into a stereo port requires different impedance matching.
No, this is an unbalanced cable. It splits a stereo 3.5mm signal into two mono 6.35mm unbalanced signals.
No, this is intended for line-level audio signals and does not support the power or wiring requirements for standard microphones.
Yes, it will work with smartphones that have a 3.5mm headphone jack. If your phone only has USB-C or Lightning, you will need an appropriate digital-to-analog adapter first.
Yes, the ProSignal range includes 2m (PSG00026) and 5m (PSG00028) variants to suit different setup needs.
Check that both 6.35mm mono jacks are pushed fully into their respective inputs and ensure the channel panning on your mixer or interface is set correctly.
Ensure that both the audio source and the destination equipment are powered from the same power source to prevent ground loops. Also, check that the cable is not running parallel to heavy power cords.
Inspect the cable for sharp kinks or crushed sections and verify that the audio ports on your source device are free of dust or debris.
To ensure optimal performance, insert the 3.5mm jack fully into your audio source until you feel a click. When connecting to a mixer, assign the two 6.35mm mono plugs to dedicated channels—typically labeled Left (White/Tip) and Right (Red/Ring)—to maintain correct stereo imaging.
Compatibility includes any device with a standard 3.5mm TRS stereo output and equipment accepting 6.35mm (1/4 inch) TS inputs. For care, avoid pulling the cable by the wire itself; always grip the metal housing of the connector when unplugging. When storing, coil the cable loosely in large loops to prevent internal copper breakage or 'kinking' that can degrade signal quality over time.
