Best current price£15.96from eBay
Shopping.co.uk recommended and popular offers
eBay£15.96Visit shop SPRAYMAX 680045 1K DTP DIRECT TO PLASTIC AEROSOL 400ML DARK ANTHRACITE GREY
Visit shop2 offers from £15.96 - £19.20
View price history by clicking the chart icon.
The Indasa 1K Direct To Plastic Aerosol is designed for automotive professionals and DIY enthusiasts looking to restore or replicate original plastic textures on bumpers, trim, and automotive components. Its primary benefit is a streamlined workflow that eliminates the need for a separate adhesion promoter, significantly reducing project time while delivering a durable, professional-grade matte finish; however, users should be aware that it is not compatible with PE plastics, safety-critical components like helmets, or existing synthetic resin coatings.
| Colour | Grey |
|---|---|
| Model Part Number | 680045 |
| Brand | Indasa |
| Container Volume | 400ml |
No, this product is designed as a direct-to-plastic aerosol and does not require an adhesion promoter.
No, this product is not intended for safety-relevant plastic parts like helmets.
You should allow 5 to 10 minutes between spray coats.
The product is likely to react with the old paint, potentially causing lifting or bubbling of the finish.
Yes, you can apply conventional 1K basecoats and 2K topcoats over this surface once it has dried.
For optimal results, apply 2 to 3 spray coats to achieve a dry film thickness of approximately 30 µm.
Ensure the surface was thoroughly cleaned of contaminants and verify the substrate is not made of PE plastic.
Shake the can more thoroughly before use and maintain a consistent distance and speed while spraying.
This is likely due to an incompatible base layer, such as synthetic resin paint. Remove the existing paint completely before reapplying.
Before application, ensure the substrate is not made of PE plastic, as the aerosol will not adhere correctly. Check that no synthetic resin paints are present, as these will likely react poorly with the 1K formula. Store the canister in a cool, dry place away from direct sunlight. Before spraying, shake the canister vigorously for at least two minutes to ensure the pigments and resins are properly mixed. Always perform a test spray on a scrap piece of plastic to practice your sweeping motion and ensure the desired texture is achieved before applying to the vehicle.
