Hangman Aluminium TV Wall Hanger - Black - 26" To 55"

Yes, the system is designed to be mounted using small picture nails, eliminating the need to locate wall studs. The interlocking brackets and nail system distribute the weight effectively.

This hanger is designed for flat-panel TVs ranging from 26 inches up to 55 inches.

The hanger is UL rated to support a maximum weight of 36kg, which is approximately 80lbs.

The installation uses tiny picture nails that leave only small pinholes, significantly minimizing visible wall damage compared to traditional mounting methods.

The system is generally effective on most wall types where picture nails can be securely fastened. It is recommended to test nail holding power in an inconspicuous area if unsure.

Yes, a spirit level is included and slides into the wall bracket's track to help ensure accurate alignment during installation.

The hanger provides approximately 1 inch of clearance between the back of the TV and the wall, allowing for easy access to cords and cables.

Ensure all picture nails are fully inserted and secure. Double-check that the TV's weight does not exceed the 80lb limit. Confirm the interlocking brackets are properly engaged.

Verify that the wall bracket is perfectly level using the spirit level. Ensure there are no obstructions preventing the brackets from sliding together smoothly.

Ensure you are using a hammer with controlled force. For very hard walls, pre-drilling tiny pilot holes (smaller than the nails) might be considered, though this deviates from the no-stud principle.

Confirm that the TV is mounted flush against the wall bracket. The 1-inch clearance is designed for standard connections; if you have bulky adapters, ensure they fit within this space.