DeWalt Extreme SDS Plus Drill Bit - 7 x 160mm - DT9525-QZ

This drill bit is designed for use with SDS Plus hammer drills.

This drill bit is suitable for use on concrete, masonry, brick, and similar materials.

Clean the bit after each use and store it in a dry location. Inspect for wear or damage before each use.

The 160-degree tip design ensures better bit penetration, longer life, and faster drilling speeds.

Check for signs of wear, such as a dull tip or changes in the bit's diameter. If drilling becomes difficult or the bit breaks easily, it may need to be replaced.

The optimized flute design allows for efficient debris removal, leading to faster and cleaner drilling.

Check that you are using the correct speed and applying sufficient, consistent pressure. Ensure the bit is suitable for the material. Check for any obstructions.

Reduce pressure and drill at a lower speed. Ensure the bit is not being forced and that the drill is aligned correctly. If the bit is old or has been used excessively, replace it.

Clear debris from the hole frequently. Check the bit for damage or wear. Ensure the correct speed setting is selected for the material.