Miele CS7102-1FL SmartLine Domino Hob - Black

Installation of gas appliances requires specific knowledge and adherence to safety regulations. It is highly recommended to have the hob installed by a qualified gas safe engineer or a professional installer.

The ComfortClean pot rests are designed to be washed in the dishwasher. For best results, remove large food debris before placing them in the dishwasher.

GasStop is a safety device that automatically cuts off the gas supply if the flame is extinguished for any reason, preventing unburned gas from escaping into your kitchen.

Yes, you can use most cookware suitable for gas hobs, including stainless steel, cast iron, enamel, and copper pots and pans. Ensure the base is flat and sized appropriately for the burner.

The recommended installation compartment dimensions are 38.3 cm in width and 52.4 cm in depth. Always refer to the official installation manual for precise measurements before cutting.

Yes, this is a Miele SmartLine element. It is designed to be combined with other SmartLine appliances (like induction or wok elements, downdraft extractors) to create a customized cooking surface.

The hob features two gas burners with power ratings of 1700W for the front burner and 2700W for the rear burner.

Check if the gas supply is turned on. Ensure the electronic ignition is receiving power (check electrical connection). Clean the igniter electrode; it might be obstructed by food residue.

Verify that the burner cap is correctly seated on the burner base. Ensure the pan support is stable and level. Check for any drafts that might be affecting the flame.

This indicates the GasStop feature has activated. Ensure the burner cap and base are clean and correctly positioned. If the issue persists, contact a qualified service technician.

While designed for dishwasher cleaning, heavily burnt-on residue may require pre-soaking. Ensure you are using a suitable dishwasher detergent and that the dishwasher cycle is adequate.