Peaty's RimJob Rim Tape - 35mm x 9M
Best current price£8.99from Tweeks Cycles
Best offers
Shopping.co.uk recommended and popular offers
Tweeks Cycles£8.99Visit shop Peaty's LoamFoam Cleaner - 1 Litre
Visit shopTweeks Cycles£8.99Visit shop All Offers
4 offers from £8.99 - £19.99
View price history by clicking the chart icon.
Product Information
Full details
Peaty's RimJob Rim Tape is an essential upgrade for mountain bikers and cyclists looking to convert their wheels to a tubeless setup with a reliable, airtight seal. Engineered by pro riders and mechanics, this high-tensile tape offers exceptional durability and precise contouring for almost any rim profile. While it provides a professional-grade seal that prevents air leaks and maintains tire pressure, users should ensure their rim surface is thoroughly cleaned and degreased to achieve the maximum adhesive bond required for long-term performance.
All features
| Model Part Number | PRJ9M35 |
|---|---|
| Brand | Peaty's |
Extended Product Information
FAQs
Can I use this tape on road bike rims?
This specific 35mm version is best suited for mountain bike and wide gravel rims. Check your rim's internal width before purchasing.
Do I need to overlap the tape?
It is recommended to overlap the tape by about 10-15cm beyond the valve hole to ensure a reinforced, airtight seal.
How many rims can I tape with one roll?
One 9-meter roll covers approximately 5x 26-inch, 4x 27.5-inch, or 4x 29-inch rims.
Is the tape reusable?
No, once removed, the adhesive will lose its strength. You should apply new tape whenever replacing old rim tape.
What is the best way to clean the rim before application?
Use a lint-free cloth and high-concentration isopropyl alcohol to remove all traces of sealant residue and grease.
Troubleshooting
Tape peeling at the edges
The rim was likely not clean or degreased properly. Strip the tape, clean the rim with isopropyl alcohol, and reapply.
Air leaking around the valve hole
Ensure the valve nut is tightened securely. If it continues to leak, verify the tape was applied with enough tension to seal around the valve stem entry point.
Pros and Cons
Pros
- Extremely high tensile strength prevents snapping during installation.
- Bespoke adhesive stays firmly in place even under high tire pressures.
- Contours effectively to various rim shapes for a gap-free seal.
- Sustainable packaging with a fully recyclable core.
- Generous 9-meter length offers excellent value for multiple wheelsets.
Cons
- Requires a perfectly clean, degreased rim to achieve full adhesive strength.
- Applying high tension can be physically demanding for beginners.
- The 35mm width may be too wide for narrow road bike rims.
Setup, Compatibility & Care
To ensure a successful tubeless conversion, follow these preparation steps:
- Deep Clean: Remove all old tape residue and clean the rim bed thoroughly with isopropyl alcohol. Any lingering oil or dust will compromise the adhesive bond.
- Dry Surface: Ensure the rim is completely dry before application.
- Application: Start the application at the valve hole, maintaining constant tension to prevent air pockets.
- Burnish: Once the tape is applied, use a cloth or your thumb to press down firmly along the entire surface, particularly at the edges, to ensure a complete seal.
- Valve Installation: Use a sharp tool to puncture a small hole for the valve stem, taking care not to tear the tape beyond the valve diameter.
Compatibility: The 35mm width is specifically suited for wider mountain bike and E-bike rims. Always measure your internal rim width before purchase to ensure proper coverage of the spoke holes.