Caravan Shampoo - Care-avan

This shampoo is specifically formulated for caravan surfaces like GRP, Gelcoat, and Bailey Alu-tech. While it may clean other surfaces, it is best used on its intended application to ensure optimal results and prevent potential issues on automotive paintwork.

Always refer to the dilution instructions on the product label. The exact ratio depends on the level of soiling, but a common starting point is X ml of shampoo per Y liters of water. Adjust as needed but do not exceed recommended concentrations.

While specific environmental data is not provided, it is always recommended to use cleaning products responsibly and rinse thoroughly. Avoid allowing large amounts of undiluted product to enter waterways.

The frequency of use depends on environmental conditions and how often your caravan is used or stored outdoors. Many users find a clean every few months or after long periods of storage is sufficient.

It is recommended to apply the diluted shampoo using a soft wash mitt or sponge. For tougher areas like black streaks, a soft brush can be used gently after the shampoo has been applied and allowed to dwell for a short period.

The product is designed for effective cleaning of tough stains. While formulated for caravan surfaces, it is always advisable to wear gloves during use and rinse thoroughly to remove all residue.

Ensure the caravan surface is thoroughly rinsed with clean water. Use a separate clean water rinse if necessary. Avoid cleaning in direct hot sunlight, which can cause the solution to dry too quickly.

For very old or deeply ingrained stains, a second application or a slightly stronger dilution (within recommended limits) may be necessary. Gentle brushing with a soft-bristled brush can also help lift stubborn marks.

Verify that the correct dilution ratio is being used. Ensure the water temperature is appropriate (lukewarm is often best). Check the expiration date of the product.