Neptune Internal Wall Panel - Silver Grey Marble - 250mm x 2600mm x 7.5mm - Pack of 4

Yes, they are fully waterproof and specifically designed for use in wet areas like showers and bathrooms.

Yes, as long as the old tiles are stable, clean, and dry, you can bond the panels directly to them.

Simply wipe down the panels with a soft cloth and warm, soapy water. Avoid harsh or abrasive cleaning agents.

You will need a tape measure, a pencil, a fine-tooth saw, a spirit level, and a suitable panel adhesive.

Yes, they are excellent for backsplashes, though they should not be placed in direct, constant contact with open flame or extremely hot surfaces.

One pack contains 4 panels and covers a total area of 2.6 square metres.

Ensure the wall surface is perfectly flat. If the wall is wavy, use battens to create a level frame before installation.

Check that the wall surface is free of dust, grease, or peeling paint. Ensure the correct type of adhesive for PVC cladding is being used.

Use a straight edge as a guide and a fine-toothed saw or a sharp utility knife with multiple passes to prevent chipping the surface finish.