Best current price£41.99from Merlin Cycles
Shopping.co.uk recommended and popular offers
Merlin Cycles£41.99Visit shop Dyedbro Clear Gloss White Gravel Frame Protection - Clear
Visit shop2 offers from £41.99
View price history by clicking the chart icon.
The Dyedbro Gravel Frame Protection kit is designed for gravel, bikepacking, and road cyclists who want to maintain their bike's finish against the abrasive wear of frame bags, gear straps, and trail debris. By providing a comprehensive shield for vulnerable tubes, it ensures your frame stays pristine during long-distance tours or mixed-surface rides, though successful application requires patience and a clean environment to prevent trapped air bubbles.
| Model Part Number | DB-GB-33303 |
|---|---|
| Brand | Dyedbro |
Yes, they are designed to be removed without damaging factory paint. Use a hairdryer to gently warm the vinyl to loosen the glue.
While designed for gravel and road geometries, it can be used on mountain bikes, though some pieces may need to be trimmed to fit specific frame shapes.
It is recommended to wait at least 24 hours to ensure the adhesive has fully cured to the frame.
The material is designed to be durable, but like any clear adhesive product, prolonged exposure to harsh UV rays can eventually cause slight discoloration.
Yes, you can use sharp scissors or a clean utility knife to trim the pieces to match your bike's specific geometry.
Use a small needle to prick the bubble gently and then press the air out toward the hole.
Clean the edges with alcohol, apply gentle heat, and press firmly until the adhesive resets.
Ensure the surface was cleaned with isopropyl alcohol and that no residue from cleaning sprays remains.
To install, start by thoroughly degreasing your bike frame with isopropyl alcohol to remove all wax, oil, and dirt. Ensure the frame is completely dry. Peel the vinyl piece from its backing, align it carefully with the target area, and press down firmly, starting from the center and working outward to push out any trapped air. Use a hair dryer or heat gun on a low setting to gently warm the vinyl; this increases flexibility and improves adhesive bonding on curved tubes. For care, avoid using high-pressure washers directly against the edges of the stickers, as this can weaken the adhesive over time. If a edge begins to lift, clean the area and re-apply heat to reactivate the adhesive.
