Kockney Koi Yamitsu Ball Valve - 43mm - 50mm (1.5")

This ball valve is designed for solvent weld pipe, fitting 1.5 inch (43mm) pipe internally and 50mm pipe externally.

You will need solvent weld cement suitable for PVC pipes and potentially a pipe cutter if you need to trim your pipe. Basic tools for pipe preparation are recommended.

The high-visibility yellow handle provides a clear indication. When the handle is parallel to the pipe, the valve is open. When it is perpendicular to the pipe, the valve is closed.

This valve is designed for pond filtration systems and general water management, typically operating at lower pressures. It is not rated for high-pressure domestic plumbing applications.

The yellow handle offers quick, at-a-glance visual confirmation of the valve's status, improving operational efficiency and preventing errors.

Yes, it is constructed from durable ABS, making it suitable for outdoor pond environments. However, prolonged extreme UV exposure may affect the material over time.

Ensure the valve is correctly installed and that no debris is obstructing the mechanism. Operate it back and forth gently a few times. If the issue persists, check pipe alignment.

The pipe was likely not fully inserted or solvent cement was not applied correctly. You may need to cut the connection and re-do it with fresh solvent weld cement.

Ensure the handle is fully turned to the open or closed position. The handle should be parallel to the pipe when open and perpendicular when closed.