Bosch Professional Rotary Hammer - GBH 18V-22 X - 0611924100

The ONECHUCK system allows you to use SDS-plus, standard cylindrical, and hex drill bits in a single chuck, eliminating the need to switch chucks and increasing efficiency for various applications.

No, the Bosch GBH 18V-22 X Professional is sold as a bare unit. You will need to purchase a compatible Bosch Professional 18V battery and charger separately.

The maximum recommended drilling diameter in concrete with hammer drill bits is 22mm.

The tool features KickBack Control, which stops the tool if the bit jams, and Vibration Control to reduce user fatigue.

Yes, the tool is suitable for light chiseling tasks in materials like brick and plaster, thanks to its 2 Joules of impact energy.

The ONECHUCK is compatible with SDS-plus bits, standard cylindrical bits (up to 13mm shank), and hex shank bits.

The tool weighs approximately 2.6kg when the battery is not attached.

Ensure the battery is fully charged and properly inserted. Check if the battery contacts are clean. Verify that the tool is not locked out by the KickBack Control feature (release trigger and re-engage).

Check battery charge level. Ensure the drill bit is sharp and not damaged. Verify that the ONECHUCK is correctly gripping the bit. Clean any debris from the chuck mechanism.

Ensure you are using the correct bit for the material and application. Check if the bit is properly seated in the chuck. Allow the Vibration Control system to function; avoid applying excessive force.

This indicates the drill bit is binding in the material. Apply steady, controlled pressure. Ensure you are using the correct bit size for the hole being drilled. Clear any obstructions from the hole.