Shopping.co.uk

Tetrosyl Ultra Smart 2K Bodyfiller - 600g

Tetrosyl Ultra Smart 2K Bodyfiller - 600g

Tetrosyl Ultra Smart 2K Bodyfiller is a premium bodyfiller that is both lightweight and easy to sa...

Best current price£12.99from My Motor World

Best offers

Shopping.co.uk recommended and popular offers

All Offers

8 offers from £12.99 - £26.61

View price history by clicking the chart icon.

My Motor WorldTetrosyl Ultra Smart 2K Bodyfiller 600G
Free delivery in 1–3 days
£12.99
Visit shop
B&QB&Q - Ultrasmart 2K Body Filler Lightweight Steel Aluminum Galvanised 600G
Free delivery in 1–3 days
£14.99
Visit shop
eBayTetrosyl Ultra Smart 2K Smooth Car Body Paintwork Dent & Scratch Filler 600ml
Free delivery in 1–3 days
£14.99
Visit shop

Product Information

Full details

This guide is for anyone using Tetrosyl Ultra Smart 2K Bodyfiller, a premium bodyfiller designed for various surfaces. It offers a lightweight, easy-to-sand solution for filling imperfections. A key consideration is the correct mixing ratio to ensure optimal performance.

All features

Model Part NumberTETUSB600
BrandTetrosyl

Extended Product Information

FAQs

What surfaces is this bodyfiller suitable for?

This bodyfiller is suitable for Steel, GRP, Aluminum, Galvanized, Wood, Stone, and most Plastics.

What is the mixing ratio for the filler and hardener?

Mix 100 parts filler with 2 parts hardener.

How long should I allow the filler to cure before sanding?

Allow the filler to cure for approximately 20 minutes at 18°C before sanding.

Can this bodyfiller be used with a low bake oven?

Yes, it is suitable for low bake oven systems at 80°C/90°C.

How should I store the bodyfiller?

Store in a cool, dry place.

What type of sandpaper should I use?

Use P80-120 grit sandpaper.

What should I do if the filler is difficult to sand?

Make sure you've allowed adequate curing time. Ensure you're using the recommended sandpaper grit and apply even pressure during sanding.

Troubleshooting

Filler not hardening properly.

Ensure the correct ratio of filler to hardener is used. Make sure the hardener is compatible and not expired.

Difficulty sanding the filler.

Allow sufficient curing time before sanding. Use the recommended grit sandpaper (P80-120).

Filler not adhering to the surface.

Ensure the surface is properly cleaned and prepared before application. This may include light sanding to improve adhesion.

Pros and Cons

Pros

  • Easy to apply
  • Suitable for a wide range of materials
  • Provides a smooth finish
  • Lightweight formula for easier sanding
  • Durable and long-lasting results

Cons

  • Requires careful mixing of filler and hardener
  • Curing time needed before sanding
  • Use of too much hardener can be problematic

Setup, Compatibility & Care

  1. Surface Preparation: Ensure the surface is clean, dry, and free of rust or loose paint before application. Clean the surface thoroughly.
  2. Mixing: Mix 100 parts filler with 2 parts hardener. Avoid using too much hardener.
  3. Application: Apply the mixed filler using a spreader. Work quickly, as the mixture will begin to cure.
  4. Curing: Allow the filler to cure for approximately 20 minutes (at 18°C) before sanding.
  5. Sanding: Sand the cured filler using P80-120 grit sandpaper to achieve a smooth surface.
  6. Storage: Store the product in a cool, dry place. Keep the paste cool in summer and warm in winter.

Price History

DatePrice
Visit shop