Best current price£119.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£119.99Visit shop No Gas / Gas Mig Welder Conversion Kit - Suits Ys05605 - Mini Regulator + Hose 5056524234730
Visit shop
B&Q£139.99Visit shop - Mig Welder Conversion Kit For Gas And No Gas UseMini Regulator And Hose Included
Visit shop3 offers from £119.99 - £139.99
View price history by clicking the chart icon.
This Loops MIG Welder Conversion Kit (ys05605) is for welders seeking to enhance their existing MIG welder's versatility by enabling gas welding. Its key benefit is the seamless transition between gas and no-gas operation, offering greater flexibility for various projects. A minor caveat is the need to purchase separate consumables like wire, tips, and gas. The kit includes a mini regulator and gas hose, transforming your setup with a lightweight, easy-to-install component.
| Model Part Number | ys05605 |
|---|---|
| Brand | Loops |
You will need to purchase a reel of regular welding wire suitable for gas welding, compatible contact tips, and a gas bottle filled with the appropriate shielding gas for your project (e.g., an Argon/CO2 mix for steel).
No, this conversion kit is specifically designed and compatible only with the Loops ys05605 MIG welder model.
The conversion kit has a lightweight design with a net weight of only 0.24kg.
No, the kit includes a mini regulator and a gas connection hose, but you will need to purchase the gas bottle separately.
Gas shielding protects the molten weld pool from atmospheric contamination, leading to cleaner welds with less porosity, reduced spatter, and a smoother bead appearance, especially beneficial for thinner metals and certain alloys.
The kit is designed for easy installation and is lightweight, making it user-friendly for most users familiar with their welding equipment.
Check that the gas bottle valve is fully open. Ensure the regulator is properly attached to the bottle. Verify that all hose connections are secure and not leaking. Check the welder's gas solenoid or flow control mechanism.
Inspect the gas hose for kinks or blockages. Ensure the regulator is set to the appropriate flow rate for your application. Clean any debris from the gas bottle valve or regulator inlet.
Verify you are using the correct gas mixture for the material being welded. Ensure the gas flow rate is adequate. Check that the contact tip is not worn or dirty and is the correct size for the wire. Confirm the polarity is set correctly for gas welding.
Ensure the regulator is securely fastened to the gas cylinder. Check for any visible damage to the regulator. If the issue persists, the regulator may need replacement.
Setup: To set up the conversion kit, ensure your Loops ys05605 MIG welder is disconnected from power. Attach the included gas hose to the designated port on your welder and connect the other end to the mini regulator. Mount the regulator onto your gas bottle and connect the bottle to the welder's gas inlet. Ensure all connections are secure. You will need to purchase compatible welding wire, contact tips, and a suitable shielding gas (e.g., 75% Argon / 25% CO2 for steel).
Compatibility: This kit is specifically designed for the Loops ys05605 MIG welder model.
Care: Regularly inspect the gas hose and connections for any signs of wear or damage. Keep the mini regulator clean and free from dust or debris. Store the kit in a dry, protected area when not in use. Refer to your primary welder's manual for general maintenance procedures.
