Best current price£11.86from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£11.86Visit shop Motoledy 2 Pcs Drl Led Daytime Running Lights + Turn Signal Light 160Lm
Visit shop2 offers from £11.86
View price history by clicking the chart icon.
The motoLEDy 466 LED DRL set is an ideal choice for off-road enthusiasts looking to enhance vehicle visibility with a dual-function lighting solution. These lights deliver bright Xenon white illumination for daytime running and switch to a distinct orange flash for signaling, all while maintaining low energy consumption. It is important to note that this product is specifically designed for off-road use and is not approved for public road traffic.
| Model Part Number | 466 |
|---|---|
| Brand | motoLEDy |
No, this product is strictly for off-road use and is not approved for public road traffic.
The lights have a diameter of 23mm.
No, if you prefer, you can leave the yellow wire disconnected and use them only as daytime running lights.
The white light is 5500k, providing a bright Xenon white appearance.
Yes, they feature an IP67 rating, meaning they are dust-tight and resistant to water immersion.
The light will operate as a DRL until the turn signal (yellow wire) receives power, at which point it will switch to orange.
Verify the connection of the yellow wire; the system requires a complete signal cycle to trigger the 2-second return-to-white function.
Check your ground connection. A loose or corroded ground wire is the most common cause of irregular LED performance.
Use a multimeter to ensure you are receiving a steady 12V signal on the red wire and that the fuse for your DRL circuit is intact.
Installation is facilitated through a simple 3-wire system compatible with standard 12V vehicle power supplies. Connect the black wire to the vehicle's ground, the red wire to a 12V DRL power source, and the yellow wire to the turn signal circuit. If you prefer to use the lights strictly as daytime running lights, you can simply cap off the yellow wire. For care, ensure the mounting area is clear of debris. Because the housing is IP67 rated, it is resistant to water splashes, but avoid direct high-pressure power washing on the LED lens to maintain the integrity of the seal.
